COCHEV
1/2 ton status
word. i'll pm you my addy. do you have paypal? if so, send me your user name....
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Parting Out '87 Suburban 454, Almost no rust!
- Thread starter ngoluba
- Start date
word. i'll pm you my addy. do you have paypal? if so, send me your user name....
ngoluba
Registered Member
My PayPal account is [email protected]. I'll pull them tomorrow night and try to get them shipped on Saturday. Monday the latest.
SPIRK
Registered Member
Either I missed it or no one has asked about the axles. If you're willing to remove the rear from the truck then I'm interested.
ngoluba
Registered Member
Rear axle still available, I'm planning to pull it this week. Front clip has been pulled, engine and tranny are out, doors are off, wheels are off, most of the interior has been removed. Planning to pull the fuel tank, fuel lines, steering box, and some other odds and ends, then off to the yard with the carcass. Wife wants her garage spot back.
phreddei166
1/2 ton status
What does it have for a radio ? I,m looking for a CHEAP am/fm cassette with digital display and radio presets, shaft mount style.
ngoluba
Registered Member
The radio was missing when I bought it.
Indy4x4Fab
1/2 ton status
looking for a set of for door panels for my crew cab k20 and r urs power windows? plz email me back at [email protected] thanks
ngoluba
Registered Member
I'm keeping the passenger doors for my other Suburban. Mine are dented and rusty. The rear utility (barn) doors are still available.
ngoluba
Registered Member
Had some questions about the front clip for $400. It's straight and nearly rust free. Here's what it includes:
Both fenders and inner fenders, hood with emblem intact, complete grill with headlights and turn signals, radiator support, and the full cooling stack: 454 radiator (quite a bit bigger than the radiator that comes with a 350), shroud, oil cooler, additional transmission fluid cooler with auxiliary pusher fan, and air conditioning condenser. Radiator overflow tank, wiper washer fluid tank, hood hinges. Headlight wiring harness clipped just behind washer fluid tank. I pulled the passenger side marker lamp for my other suburban.
Some of the mounting tabs for the grill are loose. As far as rust goes, there are two small patches on each of the backside of the inner fenders where they touch the firewall. I only saw them once I pulled the clip away from the vehicle. You can't see them from the fenderwell. There is one spot on the fender where the paint is bubbled. There must be some rust behind the paint in this spot, but it is still very solid and a long way from rusting through, the rust has not popped through the paint yet.
Both fenders and inner fenders, hood with emblem intact, complete grill with headlights and turn signals, radiator support, and the full cooling stack: 454 radiator (quite a bit bigger than the radiator that comes with a 350), shroud, oil cooler, additional transmission fluid cooler with auxiliary pusher fan, and air conditioning condenser. Radiator overflow tank, wiper washer fluid tank, hood hinges. Headlight wiring harness clipped just behind washer fluid tank. I pulled the passenger side marker lamp for my other suburban.
Some of the mounting tabs for the grill are loose. As far as rust goes, there are two small patches on each of the backside of the inner fenders where they touch the firewall. I only saw them once I pulled the clip away from the vehicle. You can't see them from the fenderwell. There is one spot on the fender where the paint is bubbled. There must be some rust behind the paint in this spot, but it is still very solid and a long way from rusting through, the rust has not popped through the paint yet.
Do you still have the bezel and gauges? If so, do you have a picture of the right side of the bezel gauge area where the radio and climate controls are?
ngoluba
Registered Member
Still have them. The radio slot has been enlarged. I'll try to get some pics tomorrow night.
ngoluba
Registered Member
Enlarged radio slot is 2" x 7 1/4". Speedo and all gauges worked properly when I drove it the last time.
Back of speedo head has provisions for vehicle speed sensor (needed for fuel injection). Speedo works fine with carbed trucks without the sensor.
Back of speedo head has provisions for vehicle speed sensor (needed for fuel injection). Speedo works fine with carbed trucks without the sensor.
JakeSnake785
Registered Member
How much for the bumper guards and shipping to 32404
cdoggwsu
1/2 ton status
Hello,
Are the fuel lines still available? Have not heard anything in a while.
Also how about the hump and fuel door area? How much for the fuel line hump thing and door section. Looking to graft it into my bed of my project.
Thanks,
Tim
Are the fuel lines still available? Have not heard anything in a while.
Also how about the hump and fuel door area? How much for the fuel line hump thing and door section. Looking to graft it into my bed of my project.
Thanks,
Tim
Indy4x4Fab
1/2 ton status
im looking to see if u r willing to part with the dash pad and drivers side rear arm rest on the door? how much and can u post pichures of them.
mrluhman
1/2 ton status
Did the front clip sell? If not I would be interested in the hood plus hood ornament. How much shipped to 50131 if available?
If you still have the truck, I need the front inner (next to console) floor mounts for the bucket seats. They are little brackets that are spot welded to the floor.
blazin_blazer
1/2 ton status
i'm still interested in that hood ornament if the hood or frontcap didn't/doesn't sell...thanks....i'm just checking in on it, as 4 months ago, you said you were ''going to pick at it for about a week, then it's off to the salvage yard.'' i just don't want it to go to scrap...thanks again
