Ok, I have a '90 K5 Silverado that was supposed to be sold. But the buyer just back out. So I am going to part it out... I am keeping some things for a future project. What I am keeping: engine, tranny, t-case, d-shafts, column, harness/comp... May be keeping the core support and grille set-up. But if someone makes me a good offer I will consider it.. So I will be parting out anything else. The truck is fully loaded. Power doors, windows, cruise..... Has 6" Superlift Superride front springs with 3" blocks/add-a-leafs in the rear... Four Gab G63438 shocks with less than 100 miles on them... Blue velour seats(all 3), sliding window top, etc.... The axles are a D44 and 12bolt. Both welded with 4.10's, but the gears have chipped teeth.. So the housings and gears are pretty useless, but the front and rear shafts are good as well as some Warn Premium hubs. Has (2) 35x12.50x15 BFG AT K/O's on 15x8 steel ralleys. Around 50% tread. And (2) 35x12.50x15 BFG AT's on 15x8 steel ralleys... About 30% tread. Will sell the power door guts. The motors were a little slow, but truck sat for a while so they may just need to be used. Keeping the door shells... So if there are any little parts you need... Please let me know! Located in Masury, OH..