What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Parting out '90 K5 silverado in Ohio.

Emmettology 101

Emmettology 101

3/4 ton status
Joined
May 9, 2000
Posts
8,130
Reaction score
2
Location
PA
Ok, I have a '90 K5 Silverado that was supposed to be sold. But the buyer just back out. So I am going to part it out...

I am keeping some things for a future project.
What I am keeping:
engine, tranny, t-case, d-shafts, column, harness/comp... May be keeping the core support and grille set-up. But if someone makes me a good offer I will consider it..


So I will be parting out anything else. The truck is fully loaded. Power doors, windows, cruise..... Has 6" Superlift Superride front springs with 3" blocks/add-a-leafs in the rear... Four Gab G63438 shocks with less than 100 miles on them... Blue velour seats(all 3), sliding window top, etc....

The axles are a D44 and 12bolt. Both welded with 4.10's, but the gears have chipped teeth.. So the housings and gears are pretty useless, but the front and rear shafts are good as well as some Warn Premium hubs.

Has (2) 35x12.50x15 BFG AT K/O's on 15x8 steel ralleys. Around 50% tread. And (2) 35x12.50x15 BFG AT's on 15x8 steel ralleys... About 30% tread.

Will sell the power door guts. The motors were a little slow, but truck sat for a while so they may just need to be used. Keeping the door shells...


So if there are any little parts you need... Please let me know! :thumb:


Located in Masury, OH..
 
Pad is blue. Cant remember if it is cracked. I will look in the AM. IF it isn't I will get pics! :thumb:
 
Blaerkraze - will check at lunchtime on the dash. Got up late for work this morning. SOrry..


JJ - pm sent..

Bigblaze - will check and see if they are intact at lunchtime. :thumb:
 
i also need drivers side headlight bezel, if you end up partin that out, hows the rug, shape and color? the plastic piece that covers the spring on the bottom of the seat, where you can recline the seat??....thats all i can think of for now....
 
If I sell the front stuff, I'd liek to sell the core support/grille/lights, etc all as one...

No carpet...... And will check the plastic pieces..
 
Dash pad is cracked around the center speaker as usual.. :(

The side plastics on the seat are decent, but I'd like to keep them with the seats in case someone wanted the seats..

Forgot to check on the sliding cap latches.. :doah: Will check'em tonight.
 
How much for the two front seat brackets? are they in good shape? does the blazer have a good looking bling bling :haha: chrome rear bumper? if so how much for it? how much do you want for the entire grill assembly less the core support because of shipping(for a conversion)?
thanks
pat
 
Emmettology 101 said:
If I sell the front stuff, I'd liek to sell the core support/grille/lights, etc all as one.
Click to expand...

just curious....what kind of $ ya want for the rad support?...i'm thinkin of changin over to that style:confused:
 
how do the door panels look? could you snap a pic of them? i am in need of panels, power switches, arm rests, pull straps and trim if they are in somewhat decent condition. also, does it have a passenger side tow hook?
 
Door panels are decent, but the trim is coming unglued and coming off. Will get some pics tomorrow.
 
I am interested in the 6" Superlift Superride front springs. Could I get a picture of them and a price with shipping to zip 37865? PM me or email the pics and info to matt_tedder at yahoo.com. Thanks.

Matt
 
You must log in or register to reply here.

Latest Posts

Top Bottom