72JimmyBob
Registered Member
Let me know what you need and I'll see if I have it still.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Parting out my 72 GMC Jimmy
- Thread starter 72JimmyBob
- Start date
Where are you in Calif? Do you still have the Transfer case cross support that goes from frame rail to frame rail? Or whatever it is called. The doors still there?
Thanks
Hoby
Thanks
Hoby
bp71k5
3/4 ton status
Looking for the two metal clips that bolt the front of the rear seat to the floor.
Mudbug1979
1/2 ton status
Rear window shell
From the Hard top, I need hinges and all. Let me know please.
From the Hard top, I need hinges and all. Let me know please.
72JimmyBob
Registered Member
Mudbug1979
1/2 ton status
rear window
Do you have this rear window shell?
Do you have this rear window shell?
72JimmyBob
Registered Member
Dont have them.
72JimmyBob
Registered Member
I do have the rear window shell and glass, but no hinges.
72JimmyBob
Registered Member
I do have a rear window shell, but no hinges, handle or hardware for it. It's in decent enough shape but will need some reinforcements on some cracks to last much longer. The guy I got it from was just starting to sand it down and work on it.
72JimmyBob
Registered Member
I'm in the San Jose area of northern CA. I do have that transfer case support for an automatic (haven't looked to see if they are the same as on a manual) My issue is I need to transport the "remains" to junk very soon so the tranny will need to be supported which isn't a big deal, but my timeline to get the remains out of where they are is very short and I'm running out of time to get all my project items accomplished. If you can come and take it off, that would help. If you want to trade a little time you can just have that piece and other items as you need them. I do have a drivers side door that will need to be rust proofed quick or be lost. One pass door was tweaked in the wreck and the other I'm using but is majorly rusted through so I'll replace it when I have the money.
bp71k5
3/4 ton status
Was it a CST version? Maybe you can post some pictures of what's there to make it easier.
72JimmyBob
Registered Member
As would figure, my camera broke recently and is being repaired, so no pics right now, not to mention I'm still taking stuff off of it for my own project. The reason I posted is because my timeline is short to have the remains out of where I'm working on the project. Sorry if I seem scattered, but I definitely am. I'll have to get back to you some other time.
blazindorito
1/2 ton status
Hoby, I have an extra tranny crossmember for a 350. I'll send you a picture if you want. You might need to purchase a new thingamabob. I can't remember right now but it bolts to the crossmember to the tranny.
72BigBlazer
Registered Member
Do you happen to still have the front seat mounts? I have seats, just need the mounts themselves. Thanks
72JimmyBob
Registered Member
myraley
1/2 ton status
do you have arm rests for the rear bench seat? They are bolt-ons, I believe.
Thanks, myraley
Thanks, myraley
