problem :doah:

[Randy92782]

Anyone ever install a speaker box in an 88-98 extended cab Chevy pickup?? I can NOT get the friggin factory jack boxout. I took out the bolt but the stud for the wingnut just won't come out and it's pissin me off

 

[RockinChevy]

Use cut off wheel.

 

[Randy92782]

Use cut off wheel.

thought that'd be the answer. Was hoping not to.

Kinda wish i could save it but oh well

 

[BulldogK5]

Check underneath. It might have a captured nut on the underside and you need to get some pliers out on it.

 

[Randy92782]

Check underneath. It might have a captured nut on the underside and you need to get some pliers out on it.

Checked but the nut looks like one of those square nuts you'd see on like a fender for the bolt to thread into and the nut stationary

check again tomorrow though thanks

 

[BulldogK5]

looks like one of those square nuts you'd see on like a fender for the bolt to thread into and the nut stationary

That is a captured nut or at least a close enough description. Try putting some pliers on it with a good grip and see if it will move.

 

[Randy92782]

That is a captured nut or at least a close enough description. Try putting some pliers on it with a good grip and see if it will move.

Good vicegrips and tightened down so tight i squeezed with all my might to get closed. Just spun on it. think i'll have to lube the underside with something but i ran out PB blaster

 

[BulldogK5]

Just spun on it. think i'll have to lube the underside with something but i ran out PB blaster

Sig line right there.

 

[Randy92782]

Sig line right there.

Nice