pennsylvaniaboy
1/2 ton status
who here is running racign seats w/ harnesses. or non stock buckets with harnesses...post em up
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
racing seats
- Thread starter pennsylvaniaboy
- Start date
5280k5
1/2 ton status
Here's my setup, PRP seats and Crow harnesses.
Got any close ups of your seat mounting setup? Like the brackets?
5280k5
1/2 ton status
Are you talking about the seat tracks, they are just the slider tracks PRP sells for their seats. The actual metal the tracks bolt to is just a piece of small square tube(maybe 1") with a round tab welded to it that allows the seat track bolts to go through.
I can get you a close up pic. if that would be easier than picturing it in your head. I found one other pic. that might show you what you're looking for, let me know if you want some more.
I can get you a close up pic. if that would be easier than picturing it in your head. I found one other pic. that might show you what you're looking for, let me know if you want some more.
Actually, that new pic helps a lot.. So, the tracks are just welded onto the cage?
5280k5
1/2 ton status
The tracks bolt to the seat and have studs that extend down through the tabs, they're just those little fabricators tabs that a lot of people sell for like shocks and stuff. Here's some pics from PRP's site and a link
http://www.prpseats.com/home.html
http://www.prpseats.com/home.html
Thanks for the info and link...
5280k5
1/2 ton status
No problem 
nad
1/2 ton status
Looks good. Man, if I only had the equipment, money, and skills to make a nice rollcage...
5280k5
1/2 ton status
The only thing I had was the money(tax refund 2 yrs. ago). I don't have the equipment and definitely not the skills(yet)
I try and use whatever I get back on my taxes to make a major purchase on my k5 every year and with the full convertible a rollcage was pretty high on the priority list. I did sand the whole cage by hand and etch primed it myself before my buddy painted it for me. You can see it better in the second pic. but while the truck was apart we also painted all the dash metal,a-pillars & windshield header to match the cage color then spray lined the whole interior tub with Reflex truck bed liner.
- Joined
- Mar 3, 2000
- Posts
- 9,122
- Reaction score
- 7,075
PRP seats and RCI harnesses, cage mounted. I also used PRP sliders and bolted them to flat stock like 1/4 by 1 1/2 wide that was welded to 1 by 2 rectangular that was welded to the cage. Tabs were used for harness attachment points.
Rear seat I used tube rings from DIY4X that were put on the tube when cage was made and welded at the proper location later.
Rear seat I used tube rings from DIY4X that were put on the tube when cage was made and welded at the proper location later.
