remote starter

[wazzabie]

how do I attach the remote starter to the 350? I just need to turn the engine over several times. I would like to keep the plugs and wires on the engine still. What do I need to remove so it does not start? 1978 350

 

[sweetk30]

single red wire to coil on dist. possible pink wire from years of fadding.

 

[wazzabie]

single red wire to coil on dist. possible pink wire from years of fadding.

So one wire to dist coil and the other to ground?

 

[KansasTwister]

To keep it from turning over and keep it from firing you need to remove the red wire to the distributor, then hook up remote starter.

 

[sweetk30]

opps sorry forgot turn over of motor.

purple wire on starter. supply it with 12volts when needed to bump it.

 

[British Slave]

You can pickup that purple wire in the wiring harness right behind the brake master cylinder. It will require a little skinning of the insulation, but I find it much easier to hook up my remote starter switch there than on the starter soleniod. To keep it from starting, don't turn the key on, leave it off.

 

[sweetk30]

just for safty dont care if key is off.

PULL the 12v wire from dist.

we dont need a i am hurt bad thread.