Removing bedliner overspray on windshield?

[handloader90]

P.O. bedlined the entire truck and some got on the windshield, it's not thick just overspray.

What's a good method to remove it without scuffing the glass up?

I was thinking acetone and a scotch-brite pad?

 

[Phil513]

I always used a razor blade for overspray.

 

[toomany]

I'd try a razor blade at a shallow angle.

 

[sweetk30]

x3 fresh new razor blades . . . grab around a dozen when even starts to feel dull swap in a new .

I did a few windshields with paint and did a up/down and side /side .

then good lacquer thinner to finish off clean up the job .

 

[blazinzuk]

Yep razor blade.

 

[nutt7]

Clean the area first. Dust can cause scratches.

 

[handloader90]

Thanks for the recommendations!

 

[rampage]

Might want to round off the corners of the blade so you don't accidentally dig it in and scratch the glass.

 

[handloader90]

Might want to round off the corners of the blade so you don't accidentally dig it in and scratch the glass.

Good idea, thanks.

 

[handloader90]

Should go pretty quick once I get into it.