rochester quad question, stalls during warm up

[ciffer]

as far as i know, the intake manifold and carb are both original to the motor. i'll take a picture of the carb and intake when i get off work. that will work a lot better.

edit- i did find the exact carb that i have. number matches exactly.
http://cgi.ebay.com/ebaymotors/Quad...temQQimsxZ20090904?IMSfp=TL0909042110006r3717

the intake manifold has a small sheet metal box on the manifold on the passanger side. i haven't looked inside the box.

 

[Kenny78]

oh, my mistake then. Thats a divorced choke and I do not know how they operate. Good luck

 

[ciffer]

took a street light and every Maglite i own, but got a decent cell phone picture in the middle of the night.




the spring is not connected to the choke pull-off in any way. that is the problem, now i just need the parts to hook them together again.

 

[Big Ray]

methinks you need something like this.......

The coil sits down in the manifold, and the arm rises up as the coils heat up, opening your choke.....

 

[ciffer]

ordered it. i couldn't find the linkage by itself anywhere. that should take care of the stalling at warm up, maybe it'll straighten out the other problems as well.

 

[ciffer]

put the choke spring in today, choke works great now. i'll need to drive it more before i know if anything else needs adjusting, but it fells good so far.

 

[Big Ray]

excellent.......