What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Round Pattern 205

USSkoval

USSkoval

Thornbirds look cool... Yeah, I said it
 Premium
Joined
Jan 9, 2008
Posts
3,768
Reaction score
3,205
Location
Fayette County, Ohio
What's the ballpark going rate of a GM round pattern 205 these days? I don't see them for sale much at all anymore, are they still spendy or have they fallen off?

I ask because I have one with no current plans at all to use it and I need to clear out a bunch of my extra stuff. Well, I don't need to, but I probably should. But if they are valued significantly less than they used to be, I'll just hold onto it.
 
I am in also .

I have one with 60k ish miles on it and th400 adapter mech speedo and twin stick mod and ord shifter setup .
 
Ain’t no good, I’ll give ya $25 CASH. :D

Seriously, a couple of years ago they were going for $600 so I’m sure that’s gone up.
 
nvrenuf said:
Ain’t no good, I’ll give ya $25 CASH. :D

Seriously, a couple of years ago they were going for $600 so I’m sure that’s gone up.
Click to expand...
Usually when I own parts that are harder to find and somewhat valuable, they end up going down in value. Or I sell something when they are cheap and then they become valuable, lol.
 
I have prob 8 or 9 empty fig 8 cases with small bearing i can have punched out as needed . Wonder how much for each of the. .
 
I got lucky and found a round pattern VSS 205 with 4l80e adapter for $150 bucks about 10 years ago. Traded the adapter, but I’m hanging on to the 205. The only reason I could see this model going down in value is that you can get a mechanical unit machined to VSS, and the underdrive unit that I went with only mates to figure 8, without modification.

I’ve bought and sold several small bearing figure 8’s. Most I could get out of them were about $400 with adapter.

Round patterns are hard to find, so that plays into the price for sure.
 
I dug out my round pattern 205 in question and I was reminded that it doesn't have output yokes on it. However, I did discover that the front output is 32 spline.

I still haven't decided if it's worth selling. I only have two different 32 spline output transmissions that aren't in use yet. An SM 465, but I don't have the correct 205 adapter for it, nor do I care to buy one due to cost. I also have an A833 overdrive 4-speed that is round pattern and 32 spline, but there's no shift rail notch or shifter pivot bolt provision. It would be overkill for that lighter duty transmission anyway.

Realistically I probably should just sell it and find a second 32 spline np208 or a 241 to use with what I currently have available. I've still got plans to run a couple more 205's in upcoming truck swaps, but I've still got complete 10 and 27 spline setups to use.

20250319_191622.jpg20250319_191510.jpg
 
USSkoval said:
I dug out my round pattern 205 in question and I was reminded that it doesn't have output yokes on it. However, I did discover that the front output is 32 spline.

I still haven't decided if it's worth selling. I only have two different 32 spline output transmissions that aren't in use yet. An SM 465, but I don't have the correct 205 adapter for it, nor do I care to buy one due to cost. I also have an A833 overdrive 4-speed that is round pattern and 32 spline, but there's no shift rail notch or shifter pivot bolt provision. It would be overkill for that lighter duty transmission anyway.

Realistically I probably should just sell it and find a second 32 spline np208 or a 241 to use with what I currently have available. I've still got plans to run a couple more 205's in upcoming truck swaps, but I've still got complete 10 and 27 spline setups to use.

View attachment 500062View attachment 500063
Click to expand...
I have an extra adapter for your 32 spline 205 and 465.
$125 with the chrome shifter
 
You must log in or register to reply here.

Latest Posts

Top Bottom