johnathan
1/2 ton status
This seal was behind the spindle.(front 10 bolt). I can't seem to get anyone to find this at the parts stores.Does anyone have the part # or the name.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Seal?
- Thread starter johnathan
- Start date
Muddytazz
1 ton status
How far behind the spindle was it?
Muddytazz
1 ton status
Looks to me like the outer axle seal
johnathan
1/2 ton status
Between the knuckle and the spindle I believe.It's been a few days since I tore it all down.Its in three pieces.Thats the way it came out on both sides.I don't know if it was originaly one piece or not.
Muddytazz
1 ton status
http://rides.webshots.com/album/73319088cvBHjx
Check out my link here for pics of breakdowns and parts lists....if this link doesn't work, just click my webshots link in my sig
Check out my link here for pics of breakdowns and parts lists....if this link doesn't work, just click my webshots link in my sig
johnathan
1/2 ton status
From the diagram of the D44 breakdown it looks like maybe the first one after the knuckle 45......46 maybe.
Muddytazz
1 ton status
Gimme a min, I have a breakdown of a 10bolt of the 79-80 era, but is the same
johnathan
1/2 ton status
I just took a look in the LMC mag.,and I think it's an oil deflecter,spindle seal,and a spacer.It's hard to say for sure lookin at a diagram though.
Muddytazz
1 ton status
Here is the scans of the 10bolt I just did, or I can email them
johnathan
1/2 ton status
That's very helpful.Can't THANK you enough!
cegusman
3/4 ton status
SBk1 or SBK3 is the part number. one is for the 10bolt/dana44 and the other is for the dana60. Just not sure which one.
