Selling a pair of 14 bolt FF SRW hubs

[gotblazers]

I bought a disc conversion kit that included SRW hubs so i dont need the ones off my axle. I was told by the seller that these axles came off a 3/4 ton burb 84 or earlier. The Drums and studs in the picture are also available if interested.
Im asking 90$ + shipping for the pair.

I also have all the internals. alot of it was cut getting these things out since i planned to throw it away but for a few bucks i wouldnt mind passing the backing plates/internals to someone who had a use for em.

 

[gonefishin]

i bought a 14b van width i think its the same stuff as a regular srw and it has a cracked drum and missing brakes and all hardware on one side i believe the passenger side do you have everything i need mine has the bolt in ebrake cables if that matters and i need that stuff too if you have it

 

[gotblazers]

i bought a 14b van width i think its the same stuff as a regular srw and it has a cracked drum and missing brakes and all hardware on one side i believe the passenger side do you have everything i need mine has the bolt in ebrake cables if that matters and i need that stuff too if you have it

I got everything that came out of mine. Only thing I cut was the e-brake cable inside the backing plate and it came cut off on the other side so you may have to replace that if you want an e-brake. I dont know if the drum is within usable specs or not,But if you are interested in it i can get it measured and see what kind of life its got left in it.

 

[gonefishin]

yea i am interested see if its usable is the brakes on one side usable too i am trying to do this on the cheap lol as much used stuff as possible i wonder if shipping is going to kill it though that looks like everything i need just buying new ebrake cables won't be that bad

 

[gotblazers]

yea i am interested see if its usable is the brakes on one side usable too i am trying to do this on the cheap lol as much used stuff as possible i wonder if shipping is going to kill it though that looks like everything i need just buying new ebrake cables won't be that bad

I'll take it to work and get it measured by a tech. I'd be willing to do 40+ shipping for the drum and all internals. You will need to install a new wheel cylinder definitley and maybe pads. The pads thickness looked fine im just not sure if they have an age limit.

 

[gonefishin]

and also you wouldnt have an extra set of spindle nuts i guess thats what they are called the things that hold the bearings locked in lol i am missing some of that stuff too its all mixed matched from one side to the other so i don't know what style is supposed to be there and that is the 13 inch brakes right i think thats what mine is

 

[gotblazers]

and also you wouldnt have an extra set of spindle nuts i guess thats what they are called the things that hold the bearings locked in lol i am missing some of that stuff too its all mixed matched from one side to the other so i don't know what style is supposed to be there and that is the 13 inch brakes right i think thats what mine is

Unfortunately i do not have any spares. These are the 11'' Because they are off of a 3/4 ton suburban.

 

[gonefishin]

i went out and measured today and i have 13 inch brakes thanks anyway man

 

[gotblazers]

i went out and measured today and i have 13 inch brakes thanks anyway man

No problem, Good luck. If you wanted to use 11'' brakes instead your more than welcome to it otherwise i will probably take it along with a few other things for scrap money.

 

[gonefishin]

what would i have to do to convert to 11 inch brakes? swap backing plates and all other hardware ? if so what would you want for both drums brakes and everything i need to convert it any idea how much shipping would be for all that it could either go to my house 77327 or my job 77301

 

[gotblazers]

what would i have to do to convert to 11 inch brakes? swap backing plates and all other hardware ? if so what would you want for both drums brakes and everything i need to convert it any idea how much shipping would be for all that it could either go to my house 77327 or my job 77301

I cut a few springs on the driverside so you wouldnt want that side. Even if i hadnt you would be looking at probably 70 bucks to me and another 80 in shipping. At that price Just swap on Some disc's, Everybodys doin it .

 

[gonefishin]

thanks anyway man i thought about disk but what did you do for an e brake

 

[gotblazers]

thanks anyway man i thought about disk but what did you do for an e brake

Im probably going to use a cutting brake. I've heard Cadillac El' Dorado Calipers have provisions for a e-brake though so maybe look into that.

 

[gotblazers]

ttt

 

[gotblazers]

ttt

 

[gotblazers]

ttt