StevoandaRedK5
1/2 ton status
Either a full set of 6 lugs, or a single dana 44 hub with the smaller diameter inner wheel bearing, i don't need rotors. I will pay shipping, could probably fit them in a couple of flat rate boxes.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Set of Dana 44 or GM 10 Bolt 6 lug Spindles and Hubs
- Thread starter StevoandaRedK5
- Start date
Muddytazz
1 ton status
I have a complete 10bolt 6 lug if your interested in parts. Even has almost brand new warn premiums
bp71k5
3/4 ton status
I've got a set of either the small bearing or the large bearing. $50 shipped for the set.
StevoandaRedK5
1/2 ton status
Hey brian, let me know if you can post pics of that smaller diameter bearing hub. if not, if you say it's smaller diameter i'll take your word for it. also, how should i get you the funds?
bp71k5
3/4 ton status
Sorry, I'm slow this weekend.
The two on the right are the small bearing and the one on the left is the larger one for comparison. They're a little greasy, but that keeps the rust off of them. I'll clean it up before shipping if you want it.
One of them has a thread partially stripped a little halfway down, so I'll give you the other one.
Paypal or a check is fine. I'll PM you the details.
The two on the right are the small bearing and the one on the left is the larger one for comparison. They're a little greasy, but that keeps the rust off of them. I'll clean it up before shipping if you want it.
One of them has a thread partially stripped a little halfway down, so I'll give you the other one.
Paypal or a check is fine. I'll PM you the details.
bp71k5
3/4 ton status
Sorry, I keep forgetting to post the dimensions.
For the large bearing spindles, the inner bearing diameter is 2.0" and the outer diameter is 1.625
For the small bearing spindles, the inner bearing diameter is 1.75", and the outer bearing diameter is 1.625"
Those are the only differences I can see.
For the large bearing spindles, the inner bearing diameter is 2.0" and the outer diameter is 1.625
For the small bearing spindles, the inner bearing diameter is 1.75", and the outer bearing diameter is 1.625"
Those are the only differences I can see.
StevoandaRedK5
1/2 ton status
it's all good, i'll check tonight, thanks brian
Stomis
Professional Amateur
I have a full 10b 1/2ton axle in a parts truck I'd be willing to yank them off tomorrow if your still interested. Let me know ASAP its getting scrapped monday.
908-692-0145
908-692-0145
