Several misc parts-including driveline parts in AR

[coloradoblazers]

1. Wilwood Parking brake calipers (WIL-120-2281 & WIL-120-2280 found here: http://www.summitracing.com/parts/wil-120-2281 ) –bought these to make a parking brake for a 14 bolt. $140/pair

2. Spicer Dana 60 30 spline hubs, used condition, rockrash, minor pitting, etc. Missing a few Allen screws that can be replaced at a hardware store. $120

3. Factory K5 jack and mounting hardware for underhood -GONE
4. Rancho dual steering stabilizer hardware/brackets (stabilizer only for reference, not included) $10

5. Flat NP208 skidplate -$40 (pending)

6. Dana 60 Raised steering block - $30

7. GM 10 bolt steering arm for 4” lift - $30
8. GM 14 bolt FF Wheel studs: fifteen(15) 9/16-18 x 3 1732 - $30

9. Offroad Design Swaybar disconnect: Sold

10. Offroad Design 1: Add a leaf (needs new hardware) - Sold
11. Pro Comp 8 inch slim 130 lights, includes 4 that work, but one has broken glass:$100

12. Manual mirrors for 95-99 GM trucks-$25
13. Dana 60 carrier, open (from a 4:10 gearset)- $50

14. Dana 60 4:10 gears- $75

15. Dana 60 Axleshafts, stock, inner long splines are no good, but all others are serviceable- 40 each for outers, 90 for long inner
16. Edelbrock Headers, BRAND NEW! (66182,66183, 66192, 66193) for 2002-2006 Chevy GMC/ Suburban or Avalanche with 8.1L and 4l85E- $325
17. Diablo Sport Tuner (U7193) for GM puckups w/ 8.1L $275
18. Newer style GM 17” wheels, fits 2009 and older(set of 4 with roller tires) - $300
19. Front tube bumper (homemade) fit 87 K5, -$50
20. Rear stock chrome bumper of 87 K5 - $30
21. Front Driveshaft from 87 K5 with SM465/208, extended approx. 2” to work with 4 inch lift, Zero –rate, and dana 60: - (Pending)$100
22. Rear Driveshaft from 87 K5 with SM465/208, with conversion joint for 14 Bolt FF -$40
23. Rear GM 14 Bolt FF with Ruffstuff disc conversion, 4:10 and gov-lock, perches for K5, pinion rotated for 4”lift SOLD
24. SM465 & shifter bought used, was planning on rebuilding -Junk
25. NP208 with shifter, gone
All are OBO, some I am looking to get rid of quick, some I will hold on to if I can’t sell….
Located in Monticello, AR 71655, will ship smaller items for cost.

 

[coloradoblazers]

Moar pics...

 

[Burbdood 74]

You got any pics for the sway bar disconnect? Also, is that $75 shipped?

 

[thatK30guy]

Interested in these:

 

[coloradoblazers]

Will get pics/more info out tomorrow

 

[Rtull32]

Would the front driveshaft be something you'd ship? If so I'd be interested shipping to 79707.

 

[stan1688]

Be willing to separate the disc brake stuff from the 14 bolt?

 

[coloradoblazers]

Be willing to separate the disc brake stuff from the 14 bolt?

Not at this time...

Pics of diveshaft.

All pm's responded to and parts shipped as of now...Thanks!

 

[mphyle0927]

still have the front shaft?

 

[noJeepshere]

Do you have pics of that raised knuckle for the Dana 60?

 

[big dan]

Do you ever come to the northern western part of AR? I would take the sm465 and np208 off your hands if you ever came this way and had room to haul it.

Don't need it bad enough to make a 4 hour trip in an old junker to get it though. Just wanting spare parts is all.

 

[YZEATER]

how much for the dana 60 shafts?

 

[coloradoblazers]

Sorry I didn't see all the questions...

still have the front shaft?

I may need it for another project, I will let you know next week..

Do you have pics of that raised knuckle for the Dana 60?

Here you go

Do you ever come to the northern western part of AR? I would take the sm465 and np208 off your hands if you ever came this way and had room to haul it.

Don't need it bad enough to make a 4 hour trip in an old junker to get it though. Just wanting spare parts is all.

Don't head that way often, and I just cracked the 465 open and discovered some rust on the gears, so I am going to see if the local tech school needs it...sorry

how much for the dana 60 shafts?

$40 each for the outers and 90 for the long inner.

 

[noJeepshere]

Oh, sorry, that's not what I'm looking for, thanks though.

 

[mphyle0927]

Front Driveshaft from 87 K5 with SM465/208, extended approx. 2” to work with 4 inch lift, Zero –rate, and dana 60: - (Pending)$100 keeping or selling?

 

[coloradoblazers]

Front Driveshaft from 87 K5 with SM465/208, extended approx. 2” to work with 4 inch lift, Zero –rate, and dana 60: - (Pending)$100 keeping or selling?

Just got it in today, keeping it, thanks!