SubYuman
1/2 ton status
Shackle flip and \"right side up\" U bolt kit for C2500
Will an ORD flip and bolt swap fit my C2500 with a 14b ff?
Will an ORD flip and bolt swap fit my C2500 with a 14b ff?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Shackle flip and "right side up" U bolt kit for C2500
- Thread starter SubYuman
- Start date
Re: Shackle flip and \"right side up\" U bolt kit for C2500
The ubolt flip will but the shackle flip kit will be a bit different. The offset from the frame will work and I think the bolt pattern will be the same but the height of the bracket for the 4wd is more than a 2wd. GM used the brackets to give the 4wds more lift so you will get more than a 4" lift from the 4" shackle flip kit. Otherwise, you're set.
The ubolt flip will but the shackle flip kit will be a bit different. The offset from the frame will work and I think the bolt pattern will be the same but the height of the bracket for the 4wd is more than a 2wd. GM used the brackets to give the 4wds more lift so you will get more than a 4" lift from the 4" shackle flip kit. Otherwise, you're set.
SubYuman
1/2 ton status
Re: Shackle flip and \"right side up\" U bolt kit for C2500
It still sits about 1.5-2" lower with the 4" block anyway. What are we talking about as far as the difference? 5-6" instead of 4"?
It still sits about 1.5-2" lower with the 4" block anyway. What are we talking about as far as the difference? 5-6" instead of 4"?
SubYuman
1/2 ton status
Or....
If someone was doing a swap, could I use their old brackets for few more "s? Cheao lift is ALWAYS a good thing!!
If someone was doing a swap, could I use their old brackets for few more "s? Cheao lift is ALWAYS a good thing!!
Re: Shackle flip and \"right side up\" U bolt kit for C2500
It should be a couple inches, so it might be what you're looking for.
You might be able to swap the entire bracket set from a 4wd of similar year to lift it like a 4wd.
It should be a couple inches, so it might be what you're looking for.
You might be able to swap the entire bracket set from a 4wd of similar year to lift it like a 4wd.
SubYuman
1/2 ton status
SOrry 'bout the double up!!!
Just trying to get some ideas on price and availablitiy...
Just trying to get some ideas on price and availablitiy...
