TripleJ75
Registered Member
Well I had hoped to clean up my floors and weld in patches...but my buddy who "borrowed" my welder was supposed to drop it off and never did!
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
So what is your weekend wrenching to do list?
- Thread starter Big91RustyBucket
- Start date
thebird00
1/2 ton status
Gonna install my WTO hydro-assist steering.
Is there any way to move the steering shaft easily?
When taking the box on and off so far I've had to line the box up on the shaft first and the bolt it to the frame. Its a real pain that way.
Mark
Is there any way to move the steering shaft easily?
When taking the box on and off so far I've had to line the box up on the shaft first and the bolt it to the frame. Its a real pain that way.
Mark
roadnotca
3/4 ton status
QUANTUM BLUE oil & NAPA GOLD FILTER on the Silverassic. Maybe the coolant too, if I get time.
Just building a redneck tranny jack and swapping a u-joint. Scratch that, I'll need to paint the d-shaft first. Maybe clean up some parts in anticipation of the tranny swap.
The first thing I going to do on my weekend of wenching is to bust out the hot wench.
I have to get my old spring hangers off and clean the frame for my b-52 kit. If still have time after goofing off, I probably start installing my new trans-cooler.
I have to get my old spring hangers off and clean the frame for my b-52 kit. If still have time after goofing off, I probably start installing my new trans-cooler.
let me know how that b-52 kit goes. I'll be putting mine in as soon as I get the DEAVER springs.
Finish fabing my switch panel, start making up wiring harness................need to wire and align the fastners. The bottom row holes are for the indicator lights. Two installed, but they'll be in the way until I get the panel wired. The far right two switches are for the front 8274 winch operation. Others are for lights and the OBA, plus a possible starter/horn button and another momentary two way like the winch one for later use if needed/wanted.
