Does anyone know where I could find a soft top for a blazer? Not really concerned with year just figured I would ask around here. Anyone want to part with their own?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
CA Soft top
- Thread starter bmxbryant9
- Start date
martinlbc
MartinLBC
i found one on craigslist, had to modify for missing parts but works great, also i found a lot more out of phoenix, AZ, that's where i bought mine
Sweet. I know I'll have to modify one for mine be cause I have a funky setup with my top. I might just get a custom one made that stretches over the cage
I have an STC FastTrac for a 76+ K5 I'll be selling as I just cut the roof off of my K5.
The good: (faded) black w/ clear windows & complete (frame, hardware, etc).
The bad: it's "high mileage", meaning it's got mud stains and the windows are pretty scratched up. The top is a little "baggy", you could probably move the frame pivot bracket at the center of the bedside back some to tighten it up (if you don't mind drilling). I also had a problem with the track system holding in an area about 12" long right at 12 o'clock on the roof. I might have been able to fix it by squeezing the track to better hold the lip on the top but I didn't want to do that knowing I intended to sell it after cutting my roof off.
This style of top has a track / lip system around the perimeter similar to a Jeep top. The track bolts to the body in the factory holes on top of the bedsides but you will need to drill 20-25 holes in the cab for the rails that run the arc of the roof and probably 10-12 for the rail on the tailgate.
$300.00 shipped
These are the best pics I've got.
The good: (faded) black w/ clear windows & complete (frame, hardware, etc).
The bad: it's "high mileage", meaning it's got mud stains and the windows are pretty scratched up. The top is a little "baggy", you could probably move the frame pivot bracket at the center of the bedside back some to tighten it up (if you don't mind drilling). I also had a problem with the track system holding in an area about 12" long right at 12 o'clock on the roof. I might have been able to fix it by squeezing the track to better hold the lip on the top but I didn't want to do that knowing I intended to sell it after cutting my roof off.
This style of top has a track / lip system around the perimeter similar to a Jeep top. The track bolts to the body in the factory holes on top of the bedsides but you will need to drill 20-25 holes in the cab for the rails that run the arc of the roof and probably 10-12 for the rail on the tailgate.
$300.00 shipped
These are the best pics I've got.
I might have to take you up on that. I don't really care about the wear on it too much because my blazer is pretty rough, more function over form. Are you in a hurry to get rid of the top? are the windows the full length of the open area? your blazer is sick! have always dug it!
Thanks! 
The windows do cover the entire open areas.
I'm not in a hurry right now, I need to get thru Christmas before I'll have time to mess with the Blazer again. I'll need to move it mid to late January so I can buy some more tubing for a cage.
The windows do cover the entire open areas.
I'm not in a hurry right now, I need to get thru Christmas before I'll have time to mess with the Blazer again. I'll need to move it mid to late January so I can buy some more tubing for a cage.
Last edited:
martinlbc
MartinLBC
that is the same top i found on craigs list... but see how mine sags on the sides, i like how yours is tight all around, im missing the frame rails that go around cab and tail gate
