***SOLD***Oil cooler setup-aftermarket

[mrk5]

***SOLD*** I have an oil cooler setup I don't need anymore. It includes B&M stack plate cooler, Trans-Dapt filter adapter, AN fittings, and hose. In theory the hoses should be the correct length to install this in any 350 equipped truck.

B&M Cooler http://www.summitracing.com/parts/bmm-70273 7.25"x11.25" and 1.5" thick. $73.34

Trans-Dapt adapter http://www.summitracing.com/parts/TRD-1322 This just installs between the block and the filter. Easy install. $49.97

The hose and fittings are another $50. So the total package was about $173 new.

I would like ***SOLD*** was $100 shipped to the lower 48.

Will consider selling just the cooler for $55 shipped to the lower 48. Or just the adapter for $35 shipped to the lower 48.

 

[azblazer]

I should be home in a day or so from work. Not sure if the adapter will work on an LS engine but i can use everything...

 

[mrk5]

Cool, let me know. Don't know about the LS use either. If they use the same filters then it's a good bet it would work.

 

[Babaganoosh]

I will take this if it is available.

 

[mrk5]

I should be home in a day or so from work. Not sure if the adapter will work on an LS engine but i can use everything...

I will take this if it is available.

I will shoot a PM at azblazer in the morning, see if he's gonna buy for sure.

 

[Babaganoosh]

Sounds good.

 

[azblazer]

Just woke up from a long 24 hrs. Last well on pad equals rig down etc.

Scott,

Doug Wright
472 Bulla Drive
GJ CO 81504

250-3800

Just let me know how i can pay you.

DW