I have a maintenance schedule in my calendar already based on Lanair manual. I did a full service including cleaning the chamber. It was really clean already. not much to do. Very little use.
Found out a broke the Oil pump controller when we dropped it on my truck, it got away from us. Replaced that and it did not work. Different part number. It would work bypassing it, but no luck hooked up. Looked on line and this part is the upgrade to mine. Was going to call Lanair and I noticed a piece of paper folded in the bottom of the box. Directions for the new wiring schematic. When you wire it with the new wires, 4 needed to be changed, it works like it should.
Put the thermostat in a few different locations before settling on one. Works like it should.
![20191210_153527[1].jpg 20191210_153527[1].jpg](https://ck5.com/forums/data/attachments/300/300006-456c99e776d7ed78f98c15f75d974de7.jpg)
Found out a broke the Oil pump controller when we dropped it on my truck, it got away from us. Replaced that and it did not work. Different part number. It would work bypassing it, but no luck hooked up. Looked on line and this part is the upgrade to mine. Was going to call Lanair and I noticed a piece of paper folded in the bottom of the box. Directions for the new wiring schematic. When you wire it with the new wires, 4 needed to be changed, it works like it should.
Put the thermostat in a few different locations before settling on one. Works like it should.

