What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

The Purple Camaro

Pulled the radiator cap off the other day and got a load of brown oily schmutz floating on the top

Now before we freak out, I didn’t reuse the head gaskets, but I did reuse the antifreeze.

I had just changed the plugs so I didn’t suspect anything rotten in the cylinders

So even though I only had half the miles on it for break in, I went ahead and pulled the oil and filter for a check

Not only was the oil clean, I didn’t have to use a hammer to pull off the filter.
 
Last edited:
Parameter controller
Works great to force it into a gear so I can make it cycle through and RPM range without trying to shift

1725300345580.png
 
then it will analyze whatever data log you load into it, or as many as you load into it at once:
1725300451475.png

1725300482960.png


WBO2
1725300588806.png
 
Cell sheet
1725300637686.png

Accidentally clipped into the PE once
1725300695069.png
 
Can you display counts per cell in the VE table screen? Per our text and those pics I sent it can help show data you want to eliminate.
 
It won't blend the two, or at least I haven't figured out how to yet.
But more time and data points allow it to do what it needs. Until then I can flip back and forth and see
 
Always more time and more data. Steady state driving is key. Per our convo we have to hope they have the data filtered good.
 
Added a bunch more 2 and 3% based solely off the MAF. I need to disable the MAF and let it log to correct back onto the VE table now
 
You must log in or register to reply here.

Latest Posts

Top Bottom