I run the lines and Y in the front, and then put the regulator on the firewall out the back of the fuel rails, it fits easier.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
That's how it used to be before the blower, but my return lines weren't equal length because the regulator was mounted on the passenger side.
I'm at the track and through tech.
We're right next to the tech booth. All the spots by the track were "spoken for"..
I'm at the track and through tech.
We're right next to the tech booth. All the spots by the track were "spoken for"..
Equal length lines won't change it, don't worry about that.
They didn't have the same bends either. One side had 180 fitting into the regulator, the other was straight.
I don't think that's a problem either, a good hose end is not enough restriction to matter at ~60 psi.
Are you measuring fuel pressure after the rail? If you still got proper pressure after the rail you should be good if it's split before the rail.
Are you measuring fuel pressure after the rail? If you still got proper pressure after the rail you should be good if it's split before the rail.
