Darren and I spoke about it, shared some measurements and it will fit up to a 32gal suburban tank.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
TnA Ultra-Duty Gas Tank Skid for K5's!
- Thread starter CFMi
- Start date
Darren and I spoke about it, shared some measurements and it will fit up to a 32gal suburban tank.
Desert turtle
Newbie
I need one of these any idea what shipping would be to 92056?
PM sent!
dbreid
1/2 ton status
Would one of these fit a 40 gallon tank in a Sub? I see the post above where it say 32 gallon, but curious if I could order a bigger one?
I have no idea what dimensions are different on a 40-gallon tank. PM me (or email me: [email protected]) some pics of your tank and some measurements, and we can compare dimensions. If it is simply a taller tank, you could either space down my skidplate, or I could make you a slightly taller one for an additional charge.
-Darren
dbreid
1/2 ton status
I actually don't have a 40 Gallon. I want to buy one and replace my current tank, but I haven't been able to figure out exactly how to get a skidplate to fit. See this thread:
http://coloradok5.com/forums/showthread.php?t=280306
http://coloradok5.com/forums/showthread.php?t=280306
I checked out the dimensions in your thread (very informative, thanks!) and I can definitely say now that my skid won't fit the 40 gallon as designed. The added length is the big problem, not just the added depth.
-Darren
PM me if you do decide to wedge that monster tank in there - I may have some ideas for a slightly modified skid for you.
brokenparts
1/2 ton status
are these still available?
Yes they are! I do not keep any pre-made on the shelf, but I can certainly make one and ship it out. Currently, lead time to fabricate has been running about a week and a half for smaller orders.
-Darren
Has any one ever used one of these after swapping a k5 tank into a truck frame? Debating putting a tank out back vs a cell in the bed.
Not sure if anyone has done this successfully or not. Please chime in on this thread if you have!
-Darren
