coreyd
Registered Member
Has anyone installed a transfer case drop, and if so what ddid you gain by doing this.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Transfer case drop
- Thread starter coreyd
- Start date
txfiremank5
1/2 ton status
I installed one on my 84 K5 when i lifted it. I just wanted to make sure I was not going to have any vibrations...
The purpose of it is to relieve the driveshaft angles, and prevent/cure any resulting vibrations.
The purpose of it is to relieve the driveshaft angles, and prevent/cure any resulting vibrations.
BlazerWheels
1/2 ton status
What he said...had to drop mine after lifting to help with the vibes. I need to find out how to adjust shifter now though, it seems to not like going all the way into park /forums/images/graemlins/dunno.gif
cochino12
1/2 ton status
What do you use to drop it? just some longer bolts and a 1" of washers ah aha?
87BrnRsd
1/2 ton status
On my 87 K5, all I had to do was put a jack under the t-case, loosen the bolts, lower the t-case, and put the metal spacers on the other side of the frame. Didnt take but about 20-30 minutes.
-Harrison
-Harrison
txfiremank5
1/2 ton status
On mine, I used a little fabbed up kit that was made for it. My cousin owned an off-road shop for many years here and he had it laying around. He gave it to me for free when I mentioned I wanted to lower the T-case when I did the lift. It was actually made out of thick walled square tubing, and already had the longer bolts etc.
Now that I have this new Blazer I'm going to have to see if I can still get stuff for cost... hope he still has all his contacts. /forums/images/graemlins/thinking.gif /forums/images/graemlins/woot.gif
Now that I have this new Blazer I'm going to have to see if I can still get stuff for cost... hope he still has all his contacts. /forums/images/graemlins/thinking.gif /forums/images/graemlins/woot.gif
