CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Trouble getting the parts i paid for…
- Thread starter 8seater
- Start date
8seater
1/2 ton status
I would hang in there. Definitely if its not something you can get from someone else, my parts are quality and were worth the wait.
Imo high angle driveline doesn’t do anything unique other than had good marketing ten years ago so it comes up on sites we like in a google search.
If you know what you want, or even half of the equation, a good local shop can build the same thing.
It helps if that shop has someone who wheels for sure. Our old shop would build us square shafts if we asked for it. It is now an ITP and they fired the experienced guys and hired cheap know nothings in the name of the bottom line.
What did you buy?
If you know what you want, or even half of the equation, a good local shop can build the same thing.
It helps if that shop has someone who wheels for sure. Our old shop would build us square shafts if we asked for it. It is now an ITP and they fired the experienced guys and hired cheap know nothings in the name of the bottom line.
What did you buy?
Tom Woods maybe?
I would also say Tom Woods. Call and order it today and install it next week. Last one I ordered was 4 days total.
Also Blazer Bash sponsor
Az driveshaft. All my trucks utilize their driveshafts. I'm local so I don't know if they build and ship but I'd call
The Valley's Choice for Driveshaft and Differential Services | Arizona Driveshaft & Differential
Your Quality Driveshaft & Differential Service and Sales in Mesa since 1983. Our experienced technicians use quality parts on your vehicle.
azdriveshaft.com
I have had over 100 shafts built at driveshaft specialist here in San Antonio. The owner wheels and is cool af. Knows a butt ton of crap about shafts.
Longest I have waited was three days.
Driveshaftspecialist.com
Longest I have waited was three days.
Driveshaftspecialist.com
I’ve installed quite a few adams driveshafts here lately. They seem nice. I fully agree with @obijuank5 that a decent local place could do it. The local ITP here has a guy that will do what I ask.
I bought from full torque drive shafts, he’s somewhere in Southern California. It works great.
I bought from full torque drive shafts, he’s somewhere in Southern California. It works great.
I use a local shop and Tom Woods.
Local fleetpride or Tatton’s through eBay, he’s in Utah, think I heard of him from someone on here, but can’t remember.
Tatton’s driveline
Tatton’s driveline
I ordered two driveshafts from HAD in late 2020 or early 2021. It took almost a year to get them, and when I did, the address was incorrect, they were sent back, and I had to go through the whole song and dance re: getting the correct address. And its wasn't off by a lot, but seemed like he was taking crappy notes when I placed the order.
Over that year, I called him multiple times, he seemed either stressed or distracted. That said, the driveshafts were quality and built to the proper spec.
Over that year, I called him multiple times, he seemed either stressed or distracted. That said, the driveshafts were quality and built to the proper spec.
If you have a local driveline builder you could get a Neapco N924141HAG (1410 / 30 degree) CV and have them build it, it could save you a lot of money in shipping.
