How come I can't post anything, or send e-mails thru your forum? I can only send PM's and thats it. I can't even veiw the pics either. 
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
TRUCKS! and USA 6x6
- Thread starter thatK30guy
- Start date
My post before yours was deleted, because of the specific reference to current and quoted customers within this post. All of you have emails.
K30 Guy, I do not own the forums, Todd does and you need to email him with that question because I do not know.
K30 Guy, I do not own the forums, Todd does and you need to email him with that question because I do not know.
Hell, I'd like to see them...
Bhintz
1/2 ton status
I was thinking the same thingk5-newbie said:
Bhintz
1/2 ton status
from pirate today about you daniel
"WHAT THE F*CK IS THAT SITE?!?!?! www.danielsympathybitches.com? WHAT A BUNCH OF SLACKJAWEDFAGGOTS if you ask me! "Awe what a bummer danial...your stuff is better...how could they do that...would you like your balls cupped too?" BLECH!!! I see he's an administrator there...be fun to join to tell those pansies to STFU!!! WHAT GOES AROUND...COMES AROUND B*TCHES!!! AH-HAHAHAHAHAHAHAHAH!!!"
That son of a bitch has really gotten into me several times. I put in an order for over two grand worth of stuff and it took him 13 weeks to NEARLY get me all the stuff. There were still parts I didn't receive. He said 12" rotors and wilwoods would work fine--bull****. He said every week that **** was on the shipping bench or he had some problems with his welder or something. I begged him to send me the Detroits so I could at least do SOMETHINGT...nothing was sent and that **** is strictly pass-thru items too. Irritating. When I finally did recieve *most* of the items, I had to remachine most of it because holes were WAY misaligned, welds were leaking, VISABLE holes were existing, pan didn't clear ring gear...it was just a friggin mess. He left me with 4 days to put two Rockwell pigs back togther, spring over the truck, get everything set up to drive 800 miles to a 4x4 meet...and ya know what...I DID. --WITH ABSOLUTELY NO HELP FROM HIM.
THEN, after all that f*cking lunacy and BS, he finds out I've been selected (and thanks anyone who voted for the M715 this year) for Top Truck Challenge and emails me like we're buds...all, "Hey, waddya need? This? That?...etc" I emailed him back and blasted him starting with, "I NEED YOU TO MAN UP ABOUT ALL THE BULL**** YOU PUT ME THROUGH A YEAR AGO." The best thing he could've done was told me to pound sand and let it go. Instead he makes me a wheel offer after I tell him that I already bought a set of XML's that happened to be on his wheels and those wheels were garbage. So I think, okay...this guy is willing to make me these for TTC just asking that I mention him in the interview. I tell him I'll see how the interview goes, intending that IF (if, because I'm POS6x6 experienced) I get the stuff and it's okay then I'll mention his shop...I'm a fair guy. Anyhow...I tell him when I need the stuff and it's no problem...of course. He calls me a couple weeks later to tell me they're done but need painted (?) and he'll ship them in a couple days. I tell him that because of his effort, I'm interested in a set of his big wheel disc brakes. We work out a price on them and they'll ship with the wheels. I tell him I'll send in a truck, he tells me I'll not beat his shipping price...I beat his price by over $100. I send in a truck on a Thursday afternoon expecting all to go smoothly since we've just spoken. I call my shipper Tuesday a.m. to find out when the stuff will hit my dock as I have to get the wheels and brakes, swap the big tires around and get the brakes on a working so I need some time to do so. She calls me back saying that the truck was refused Thurs, Fri, and Mon. !?!?!-THE F*CK?! I call him and ask what the hell the problem is and I'm told that they never stopped, then am told that they did stop and he forgot to tell his shipping guy...the other of the like TWO guys in his shop that I was sending a truck. So to make my reocurring agitation more brief...the **** gets picked up. I tell him about the work I have to do and when TTC is...starting the 6th... he tells me that I'll have them by the 6th. "DO YOU REALIZE I HAVE 2800 MILES TO GET THERE!? I'M ON THE EAST F*CKING COAST...THEY CAN'T ARRIVE HERE WHEN I ARRIVE THERE...that's why I sent the trucks early!" GGGRRRRR! So then...there's the holiday weekend that weekend so I'm leaving the next thursday and the **** hits the dock Weds eve. I had already gone out and bought caliper as I could get them cheaper...and told him I did so. Rotors are sent WITH calipers and I'm billed for them! I also slapped a rotor on my rear Rock' for an E Brake as he was sending me a cable pull caliper kit. The wheels were supposed to come with rock rings, beadlock inserts and wheel stiffeners. I got some old canS that were REALLY rust pitted then painted, dented, varying widths and last but not least eccentric. When one wheel has the centers flat against each other and another has them weld pulled over a half an inch apart...it doesn't bode well. I assembled the one with the dent and it had 1/4" wobble at the back of the can. I even broke down one of my other wheels to try them and because he didn't send inserts (though stated AND knew I was running XML's) my other inserts didn't work since there was difference in the width. I was F*CKING LIVID!!! Then, the other POS wheel that I had taken apart to get the XML off leaked the entire time at TTC and I had to air it up all the time...GAH...SOFA-KING ANGRY!!! Yeah, so NO...I didn't mention him in the interview. Mentioned Rock Logic for them helping me out with a custom 9" ram and mentioned Ouverson Engineering for helping me out with rear heavy duty double splined shafts and flanges.
I get back from TTC and call him as I had still yet to recieve the cable pull caliper and he tells me he forgot it. I told him I couldn't run any of his **** at TTC as he didn't ship what he stated, what he did ship FINALLY...was garbage, and I never had enough time anyway. Then, this joker has the balls to demad the wheels back! I told him there was no way I'm sending them back. He tells me that if they're that bad they shouldn't be in the public...I tell him they are that bad and they shouldn't have made it out of his shop and I'm not sending them back. He offers me another set with different backspacing and I refuse. He gets all pissy with me. ?!? You know...if I felt they could make a straight wheel I might have taken him up on that offer. Like I said before...LUNACY. HA YEAH, and I found out that he dropped the ball on several other guys wheels at TTC too blaming **** on his ..."PVC guy..." This was not an event to f*ck up on. One of the guys that did get his wheels drove off down one of the paved streets at TTC and me and my guys were howling laughing as one of his wheels was wobbling bad!
Damn...Sorry 'bout the book fellas. HE, his chit chat buddies, and his shop of horrors can all kiss my white, hairy, love a good grudge holding, ASS!
"WHAT THE F*CK IS THAT SITE?!?!?! www.danielsympathybitches.com? WHAT A BUNCH OF SLACKJAWEDFAGGOTS if you ask me! "Awe what a bummer danial...your stuff is better...how could they do that...would you like your balls cupped too?" BLECH!!! I see he's an administrator there...be fun to join to tell those pansies to STFU!!! WHAT GOES AROUND...COMES AROUND B*TCHES!!! AH-HAHAHAHAHAHAHAHAH!!!"
That son of a bitch has really gotten into me several times. I put in an order for over two grand worth of stuff and it took him 13 weeks to NEARLY get me all the stuff. There were still parts I didn't receive. He said 12" rotors and wilwoods would work fine--bull****. He said every week that **** was on the shipping bench or he had some problems with his welder or something. I begged him to send me the Detroits so I could at least do SOMETHINGT...nothing was sent and that **** is strictly pass-thru items too. Irritating. When I finally did recieve *most* of the items, I had to remachine most of it because holes were WAY misaligned, welds were leaking, VISABLE holes were existing, pan didn't clear ring gear...it was just a friggin mess. He left me with 4 days to put two Rockwell pigs back togther, spring over the truck, get everything set up to drive 800 miles to a 4x4 meet...and ya know what...I DID. --WITH ABSOLUTELY NO HELP FROM HIM.
THEN, after all that f*cking lunacy and BS, he finds out I've been selected (and thanks anyone who voted for the M715 this year) for Top Truck Challenge and emails me like we're buds...all, "Hey, waddya need? This? That?...etc" I emailed him back and blasted him starting with, "I NEED YOU TO MAN UP ABOUT ALL THE BULL**** YOU PUT ME THROUGH A YEAR AGO." The best thing he could've done was told me to pound sand and let it go. Instead he makes me a wheel offer after I tell him that I already bought a set of XML's that happened to be on his wheels and those wheels were garbage. So I think, okay...this guy is willing to make me these for TTC just asking that I mention him in the interview. I tell him I'll see how the interview goes, intending that IF (if, because I'm POS6x6 experienced) I get the stuff and it's okay then I'll mention his shop...I'm a fair guy. Anyhow...I tell him when I need the stuff and it's no problem...of course. He calls me a couple weeks later to tell me they're done but need painted (?) and he'll ship them in a couple days. I tell him that because of his effort, I'm interested in a set of his big wheel disc brakes. We work out a price on them and they'll ship with the wheels. I tell him I'll send in a truck, he tells me I'll not beat his shipping price...I beat his price by over $100. I send in a truck on a Thursday afternoon expecting all to go smoothly since we've just spoken. I call my shipper Tuesday a.m. to find out when the stuff will hit my dock as I have to get the wheels and brakes, swap the big tires around and get the brakes on a working so I need some time to do so. She calls me back saying that the truck was refused Thurs, Fri, and Mon. !?!?!-THE F*CK?! I call him and ask what the hell the problem is and I'm told that they never stopped, then am told that they did stop and he forgot to tell his shipping guy...the other of the like TWO guys in his shop that I was sending a truck. So to make my reocurring agitation more brief...the **** gets picked up. I tell him about the work I have to do and when TTC is...starting the 6th... he tells me that I'll have them by the 6th. "DO YOU REALIZE I HAVE 2800 MILES TO GET THERE!? I'M ON THE EAST F*CKING COAST...THEY CAN'T ARRIVE HERE WHEN I ARRIVE THERE...that's why I sent the trucks early!" GGGRRRRR! So then...there's the holiday weekend that weekend so I'm leaving the next thursday and the **** hits the dock Weds eve. I had already gone out and bought caliper as I could get them cheaper...and told him I did so. Rotors are sent WITH calipers and I'm billed for them! I also slapped a rotor on my rear Rock' for an E Brake as he was sending me a cable pull caliper kit. The wheels were supposed to come with rock rings, beadlock inserts and wheel stiffeners. I got some old canS that were REALLY rust pitted then painted, dented, varying widths and last but not least eccentric. When one wheel has the centers flat against each other and another has them weld pulled over a half an inch apart...it doesn't bode well. I assembled the one with the dent and it had 1/4" wobble at the back of the can. I even broke down one of my other wheels to try them and because he didn't send inserts (though stated AND knew I was running XML's) my other inserts didn't work since there was difference in the width. I was F*CKING LIVID!!! Then, the other POS wheel that I had taken apart to get the XML off leaked the entire time at TTC and I had to air it up all the time...GAH...SOFA-KING ANGRY!!! Yeah, so NO...I didn't mention him in the interview. Mentioned Rock Logic for them helping me out with a custom 9" ram and mentioned Ouverson Engineering for helping me out with rear heavy duty double splined shafts and flanges.
I get back from TTC and call him as I had still yet to recieve the cable pull caliper and he tells me he forgot it. I told him I couldn't run any of his **** at TTC as he didn't ship what he stated, what he did ship FINALLY...was garbage, and I never had enough time anyway. Then, this joker has the balls to demad the wheels back! I told him there was no way I'm sending them back. He tells me that if they're that bad they shouldn't be in the public...I tell him they are that bad and they shouldn't have made it out of his shop and I'm not sending them back. He offers me another set with different backspacing and I refuse. He gets all pissy with me. ?!? You know...if I felt they could make a straight wheel I might have taken him up on that offer. Like I said before...LUNACY. HA YEAH, and I found out that he dropped the ball on several other guys wheels at TTC too blaming **** on his ..."PVC guy..." This was not an event to f*ck up on. One of the guys that did get his wheels drove off down one of the paved streets at TTC and me and my guys were howling laughing as one of his wheels was wobbling bad!
Damn...Sorry 'bout the book fellas. HE, his chit chat buddies, and his shop of horrors can all kiss my white, hairy, love a good grudge holding, ASS!
I don't know anything about them, nor have I ever ordered anything from them, but I have been watching both posts and I will say that he and his company are taking (and take often, apparently) a much harsher beating on Pirate than here. Some of that is rules,but i also get the impression that he has PO'd more people there.
those welds have been ground on, repaired, something. we have a machine welder and Clint is certified. that doesnt even look mig.?? the paint is not even the same. I understand he had pinholes in them and repaired obviously those are the repair welds huh? I called Kyle directly and the welds have been ground off. I also offered to ship them back at my cost and repair the pinholes but he said he didnt need to/ want to.
About tom on pirate.
The big bitch: He told me there was a problem with 2 of the wheels I gave him, for top truck I even informed him I said send them back, and I will pay to ship them here and repair them.
he Said they were 1/4" of an inch off. I said I cannot release them like that.
I told him I will pay to ship them back he said he would rather keep them. I told him I wanted them back again and he said its no problem. so I left the free wheels there. . The pan that had a pinhole that was over a year and 1/2 ago.. and it was a pinhole and we have NEVER had another since. He didnt follow our online directions and had to grind on it to make it clear the bullgear. Tom is also running our 2 1/2 ton brakesI also gave him 2 1/2 ton brakes for the cost of the rotors with no problems last I heard. I called tom directly and left a message for him to call me. Last I talked to him there wasnt a problem.
About tom on pirate.
The big bitch: He told me there was a problem with 2 of the wheels I gave him, for top truck I even informed him I said send them back, and I will pay to ship them here and repair them.
he Said they were 1/4" of an inch off. I said I cannot release them like that.
I told him I will pay to ship them back he said he would rather keep them. I told him I wanted them back again and he said its no problem. so I left the free wheels there. . The pan that had a pinhole that was over a year and 1/2 ago.. and it was a pinhole and we have NEVER had another since. He didnt follow our online directions and had to grind on it to make it clear the bullgear. Tom is also running our 2 1/2 ton brakesI also gave him 2 1/2 ton brakes for the cost of the rotors with no problems last I heard. I called tom directly and left a message for him to call me. Last I talked to him there wasnt a problem.
Last edited:
usa6x6 said:
How the hell do you expect me to e-mail ANYONE on your cheesy site? I quoted before that I CANNOT send an e-mail AT ALL!! Only private messages is all I can send. I can't even post ONE thread nor VIEW any pics.
I'm seriously thinking about buying something from you and using it against you with my attorney just to get you closed up and out of business for good. You've screwed too many pooches, it's not funny anymore.
well put!
I'll say it again: you're full of it.
Tom is running your brakes, true, but tell the people how much he had to modify them to get them to work? Tell them how much work he had to do to get your "bolt-on" kit to actually bolt on? It's not easy when the holes are drilled wrong.
The wheels got there like, the day before he had to leave for TTC. With no inserts. And wobbly. And off-center. What a bitch he is! I'm going to get one of them as a barstool, because it sure isn't a freakin' wheel.
Eventually you're going to run out of people who have never heard of you.
I'll say it again: you're full of it.
Tom is running your brakes, true, but tell the people how much he had to modify them to get them to work? Tell them how much work he had to do to get your "bolt-on" kit to actually bolt on? It's not easy when the holes are drilled wrong.
The wheels got there like, the day before he had to leave for TTC. With no inserts. And wobbly. And off-center. What a bitch he is! I'm going to get one of them as a barstool, because it sure isn't a freakin' wheel.
Eventually you're going to run out of people who have never heard of you.
SkulzNBonz
1/2 ton status
Dan,
We briefly met last year in OKC at the Trailchasers show. I offered my services then (I am an American Welding Society Certified Welding Inspector (cert# on request)) , as well as a QC Supervisor for a heavy steel fab. shop here in the city. It seems you have some serious quality issues, and I would be willing to help you out (for a fee of course).
John A. Ward
We briefly met last year in OKC at the Trailchasers show. I offered my services then (I am an American Welding Society Certified Welding Inspector (cert# on request)) , as well as a QC Supervisor for a heavy steel fab. shop here in the city. It seems you have some serious quality issues, and I would be willing to help you out (for a fee of course).
John A. Ward
Emmettology 101
3/4 ton status
Why offer to help someone who has screwed over so many people in the industry? Not to mention he has put out so many shoddy products over the years and doesn't seem to care or change?
hahahaha....you wanna know some funny shiot? Look at all of daniels past posts around here. The post about the wobbly wheels at ttc, thats funny stuff, I hope daniel doesnt claim that you can run those death traps on the street. He said all of his wheels are made within a 0.030" tolerence, maybe he ment 30.0" tolerence. You know someone should open a shop up like what daniel has but actually be good at it, like having good quality products with good customer service. Word would get around quick and maybe finally someone can put this ass bag out of business. That really sucks that he cant live up to his hype because if he was really as good as he talks he would have one kick ass business with awesome products. I do feel kind of bad bashing on him because I dont have personal experince with the guy, but after seeing those welds on that wheel makes me wonder alot. Ohh and hey my grandma laughed when she saw those things, cmon who are you kidding with that crap. Your gonna kill someone making wheels like that.
rcurrier44
1/2 ton status
- Joined
- Oct 13, 2003
- Posts
- 320
- Reaction score
- 0
K5er4Life said:
There are plenty of people out there that make what 6x6 makes. Do some searching on pirate and you will find them. I think one of the company's names is Stazworks ...he is well known for his great products. I even recall he made alot of wheels for usa6x6 before 6x6 had a shop... they tried to screw him over and then he went into compatition aginst 6x6.
If someone has had an actual problem with a product or service please have them contact me
Daniel Little
Shop 580-361-0600
Email [email protected]
thanks for your time. -Daniel
Daniel Little
Shop 580-361-0600
Email [email protected]
thanks for your time. -Daniel
unclematty
1/2 ton status
if those welds are cert quality I'm a monkey's ass! I'll have Modine machine and manufacturing here in town weld my wheels screw this guy too much bad news about this guy. besides, if the local guys screw up (which they won't, Ive seen their work) I can always go down there and turn the place upside down!
why do people keep buyin from this guy??? he is obviosly yesterdays bad news!
why do people keep buyin from this guy??? he is obviosly yesterdays bad news!
After reading all the negative remarks about Daniel I almost want to try and buy something from him just to have an excuse to go kick his f**cking a$$. I cant believe people like him can get away with so much B.S. and still live with themselves, it makes me sick. 
I am not a violent person by nature but Daniel is one of those people that seems to think he can get away with alot.
I am not a violent person by nature but Daniel is one of those people that seems to think he can get away with alot.
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
--------------------------------------------------------------------------------
vB code is On
Smilies are On
code is On
HTML code is Off
That was an actual "copy & paste" from your site after I logged in. I can't do anything over there.
I'm still waiting for the e-mail from you or the "site owner" whoever you listed above. Guess I will be waiting for a looooooooooooooong time to get any response about this. Much like any other person who buys or deals with you. I shouldn't get my hopes up. You suck donkey balls, Daniel. :angry1: :angry1: :angry1: :angry1: :angry1:
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
--------------------------------------------------------------------------------
vB code is On
Smilies are On
code is On
HTML code is Off
That was an actual "copy & paste" from your site after I logged in. I can't do anything over there.
I'm still waiting for the e-mail from you or the "site owner" whoever you listed above. Guess I will be waiting for a looooooooooooooong time to get any response about this. Much like any other person who buys or deals with you. I shouldn't get my hopes up. You suck donkey balls, Daniel. :angry1: :angry1: :angry1: :angry1: :angry1:
OK Wes, STOP holding back! Tell us how ya really feel! 
darkshadow
1 ton status
danial you are a liar and a poor one at that.
you back paddle, try to undermin you customers, and act like a child.
you have the tanasity to call people liars and ignor your own shoddy work.
you may be able to igron this problem for some time, but BUT what if IF some was to die or even get hurt from your products do you think you could ignor that then, you wont have any busness left.
with any luck the poor basters to get hurt will be a cool 4x4er who will suck the ;life from you busness amd make it his and do good stuff.
usa6x6 now dickfree!
you back paddle, try to undermin you customers, and act like a child.
you have the tanasity to call people liars and ignor your own shoddy work.
you may be able to igron this problem for some time, but BUT what if IF some was to die or even get hurt from your products do you think you could ignor that then, you wont have any busness left.
with any luck the poor basters to get hurt will be a cool 4x4er who will suck the ;life from you busness amd make it his and do good stuff.
usa6x6 now dickfree!
How do I really feel? Ask a few members on this site whom have met me in person and let them tell you my physical size. And then let me place some orders with Daniel, whom lives south of me by maybe 5 hours.I just got off the Pirate forum and did some searching about Daniel. I came up with a few loooooooong threads that seemed to drag on forever about Dumbass. Seems like Dumbass just has no clue when to shut up and close his shop down. Reading all those replies just boils me more and more. Almost to the point of passing up my vacation down southeast in Kansas and just taking a "detour" to Lawton to personally "visit" Dumbass.
Here I sit typing up this stuff about Dumbass. I don't even care if he reads this and decides to do something about it. I will be waiting........
My attorney will have a field day with your attorney, if you should pursue this matter. Remember, I will have the backing of literally, thousands of very pissed off customers and non-customers, from just about any website you can think of. Just let me know when you're ready.
I'd like to know what Steve Gerstner and Stacey David had to talk about. Steve was quoted that he "talked for 4 hours with Stacey" about Dumbass. Steve wouldn't even tell anyone on Pirate what Stacey had to say about all the USA6X6 crap. I can only imagine what was actually said.
On second thought: To Daniel Little @ USA 6X6: I want to place several orders for several different sizes of double beadlocked rims. I also want to place an order for 10 Rockwell 2.5 ton front axles, too, all rebuilt and modified. Please send me a bill and I will pay you as long as it takes me to get it paid for. Looking forward to doing business with you.
Don't want to do business with me? Why not? Are you scared? Do us all a favor and PM one of the moderators and tell them you want to ban yourself.
