CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Two bad new TBI injectors?

sreidmx

Fortify Offroad
GMOTM Winner
Joined
Oct 24, 2013
Posts
8,409
Reaction score
7,957
Location
Yucca Valley Ca
I have been having an intermittent lean start on my 92 k2500 350 and I bought two new gp Sorensen injectors from vatozone today and it wouldn't even run.. Surged was so lean the O2 read .1 mv so I did process of elimination and eventually went back to my stock injectors, I even re spliced the wiring just to be sure. And the stock ones run fine and the new ones don't, am I missing something?
 
Anything out of the box anymore I don't trust. Two new, both dead out of the box is unlikely, but not impossible of course. There were some high pressure TBI injectors, since the auto parts store computers (and employees) are sometimes wrong, make certain they are the correct ones.

I don't know if the resistance across the terminals on those is the same as the TPI injectors, but you can test that on your stock ones vs. the new ones.
 
I got the noid light kit now and two replacement injectors.. I'll try again tommorow
 
I got the performance ones from TBI performance, and they didn't work. I forget if one or both were bad, but i put my stock ones back in and never looked back.
 
Top Bottom