What is a fair price to pay for good working NP205?
Or better, what would you sell a good working np205 with twin stick for?
Or better, what would you sell a good working np205 with twin stick for?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Used np205 price
- Thread starter TJ1978
- Start date
yours??
I have a line on a 205. He asked me how much.
If i swap. I will need new drive lines correct and cross member
Coarse spline figure 8, Like $50. A 32 spline round pattern one is the only one worth actual money, few hundred, depends on condition and outputs.
No, I quit selling stuff on C-list about 2 years ago. While I still have tons of C/K parts I only sell to the CK5 community now.
I have a very good fig 8 205 with 4spd transmission listed on the classified section here I think for $250.00 ??
It is from my personal K5 and worked great. Generally speaking with the exception of the 10 spline coupler both of these are pretty much bullet proof so hardly anyone needs them.
How can I tell by looking at a picture of it for the output and splines?
You have some real research in front of you before just buying parts. What trans are you bolting it to? What are you replacing? All the info is here if you search. Start here: https://www.offroaddesign.com/tech/...e/offroad-design-np-205-technical-information
I read that link before. I just wasnt sure if you could tell the spline count on the Tcase by a photo of it... thanks
This is exactly right. I run the 465/205 combo because they are tough, and cheap. They don't really break without abuse. There are much more desirable setups that guys are switching to, driving the price down. $250 for a quality trans/adapter/tcase is a fine price. That's why a unknown condition coarse spline tcase without any adapter or trans is really only worth about $50. The rebuild kit for a 205 is only about $125.
27 and 10 splines are 200sh, and a 32 spline is easily double.
Kain
3/4 ton status
wish i was closer to that twin stick id pick that up
Thanks thats what info I was after.
Will I, who is still a bit green be able to tell which of either the 27 or 10 spline from a picture?
I dont want this to slip by but I also dont want to be taken for less desirable 205...
You guys get $200 for a 10 spline out there? They are like doorstops around here. Nobody wants to run them anymore.
You should be able to tell all you need from a couple good pics.
It’s currently mated and been run on a TH350. So it’s either 27 or 32 spline correct?.
Should be a 27.
Cool. He is sending me a picture tomorrow. You guys have far more knowledge than me, which Im learning. I just dont want it to slip by also not pay for something it’s not.
Thanks again and for thanks your patience.. cheers..
Last edited:
I haven't run a 205 on a th350. I think the adapters are different for 203/205 but the spline count is the same 27. The crossmember may be able to be moved forward. The 205 is shorter than the 203, something around 10".
