what intake is needed for 1991 350 TBI to CARB

[barneybasher1010]

What intake is need to convert a 1991 TBI to a carb?? (Part numbers,brand,ect). Links would also be nice.

 

[JEBSR]

Your choice of carb and intake (I like the 600 cfm edlelbrock package myself) and get an HEI distributer for it. Pull the computer out and push the harness through the firewall. Take the factory intake off with tbi,harness and all in one piece. Install new intake, carb, and distributer. Run an "ignition on" power wire to the distibuter pos and another "ign on" wire to the choke (if electric), run a ported vacume line the the vacume advance on the distributer, and tune. Box the TBI setup up and sell it in the for sale forum.


http://store.summitracing.com/partdetail.asp?part=EDL%2D2101&autoview=sku
http://store.summitracing.com/partdetail.asp?autofilter=1&part=EDL%2D1406&N=700+4294925239+400065+4294839063+115&autoview=sku
http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM%2D850001R&N=700+4294925143+115&autoview=sku

 

[barneybasher1010]

I have a new distributor(still in box) and a good quadrajet carb(on my old motor)

 

[JEBSR]

Good deal, just get an edelbrock performer or another brand intake and you are set. By the way, the intake link I sent you was wrong. You need the same intake, but drilled for 87 up heads as the center two bolts on both sides are differant.

This is the one you need
http://store.summitracing.com/partdetail.asp?part=EDL%2D2104&view=32&N=700+115

 

[u2slow]

87-90(?) passenger cars and 1-ton cab & chassis still ran carbs. Get one of those intakes. The truck one is usually iron, and the car one is aluminum.

 

[JEBSR]

never saw a car with a carb after 87. what oddball thing did they run a carb on?

 

[u2slow]

Caprice/Impala.. and the same-bodied Buick & Olds. Maybe add the 87-88 Monte to that too.

 

[JEBSR]

Sure enough, Good infor. Thanks