What's under your ride

[AZ79K5Project]

One year later, chrome moly shafts, front - Lock-Right, rear - Powertrax and rear disc brakes. 3.73 gearing w/crossover.

2 1/2 inch lift then - now 4" + zero rates.

 

[obijuan]

im still stock axles BUT mildly built.

 

[Col_Sanders]

Stock 10 bolts w/3.42s. The rear whines and leaks but the front is in good shape. I'm going to hopefully go one ton in October. I will be aiming for a set of CUCV axles.

 

[jonathon]

I'm running stock 10b/10b with 3.73's.. going to remain that way for a while(3/4 ton swap is the last thing on my list unless I find a cheap 14bff/10b combo). I'm doing 4" of lift and 33s so I should be okay for a while

 

[70jimmy]

14 bolt FF rear with detroit
3/4 ton 10 bolt front with upgraded shafts and welded

4.10 gears turning 37's

 

[USSkoval]

I'm just a noob with open 10bolts and 3.42's, but hopefully that will change soon.

 

[mtnman]

Check the sig. Building to be NUKE PROOF

 

[desertrat67]

Check the sig. Building to be NUKE PROOF

If only I had $1850 & shipping laying around....

 

[mtnman]

got em as a bonus @ work!!

 

[FRIZZLEFRY]

Where is the Dana 60/70 poll option

I gots a 60 with Yukon inners,35 spline outers,ARB,hydro assist,and ORD crossover/high steer.

The rear is a Dana 70 with chromo 35 spline Mosers and a Detroit.

The gears are 5.86s

 

[makovai]

Where is the Dana 60/70 poll option

I gots a 60 with Yukon inners,35 spline outers,ARB,hydro assist,and ORD crossover/high steer.

The rear is a Dana 70 with chromo 35 spline Mosers and a Detroit.

The gears are 5.86s

thats a nice combo....wish i could say the same.

 

[MTMike]

Since my set up is not on the list, I picked nekked. Welded stock D60 DRW front, Welded stock D70HD DRW rear with disc brake conversion.

 

[obijuan]

ohh nice, i want that one day

 

[destinbeachman]

Trying to figure out how to vote at all.Don't see it anywhere ???

 

[AZ79K5Project]

Top of page 1 (post #1) - should be able to vote.

 

[destinbeachman]

I see the poll results and it says under that that I have voted already?WTF?

 

[85HeartBurb]

Front is open 60, rear is detroit 14b. Both are cucv axles.

same here

 

[onetonbb74]

my setup works great, wish i had a detroit in the front though. Maybee some 5.13 gears for the street too but who cares about the street.

got 5.38's to help my tranny in o.d. and a detroit in the front for wheelin. Figuered id update since its been a while.

 

[NewUser]

oil spots, lots of them

p/s fluid spots for me stock 12 bolt rear and 10 bolt front with 3.08 gears





along with

 

[Banzai]

just tens for now

front and read 10 bolts open with 4.56 for now want to add stronger shafts and a rear e locker.