CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Where can i get some an fittings for fuel line?
- Thread starter 5trucks
- Start date
SkysTheLimit
1/2 ton status
I just went through all this trying to figure it out. I wasn't able to find any saginaw to AN fittings. My current plans are to just replace the whole line and use AN fittings the whole way.
Someone correct me on this but I think you could cut off the flare and use one of those tube & socket fittings which depending on the size of the tubing (likely 3/8") will get you -6 AN. I think the -8 only came for 1/2" tube.
Someone correct me on this but I think you could cut off the flare and use one of those tube & socket fittings which depending on the size of the tubing (likely 3/8") will get you -6 AN. I think the -8 only came for 1/2" tube.
Slapperbar
Retired Navy NDT Examiner
Earls auto fit for the tube. it ha a -6 end for the 3/8" fuel line. they also make male saginaw to male -6. BTW -8 is 1/2" and tooooooo big.
Last edited:
fatbob
1/2 ton status
You didnt tell us what you are hooking it up to, but
Try this guys site and look under mods, and fuel lines.
http://z28boy.cz28.com/main.htm
He has info and part #s for MM to AN fittings.
Now I dont know if that is just different terminology for saginaw fitting, but it is still GM, so it may work for our trucks.
Try this guys site and look under mods, and fuel lines.
http://z28boy.cz28.com/main.htm
He has info and part #s for MM to AN fittings.
Now I dont know if that is just different terminology for saginaw fitting, but it is still GM, so it may work for our trucks.
Summit has Saginaw to AN -6, I have it on my TPI...
