Ron got back with me. complete rebuild, balance, and modify the exhaust housing to help keep it from maxing out so soon. $310.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Where to buy a CHRA for Banks Turbo?
- Thread starter eodcoduto
- Start date
Does that include a new turbine shaft, and do you have his contact info?
his response:
The non waste gated turbo is built off of the Garrett T04b turbo and Banks has the turbo made to only build lower boost pressures and I can get around that by modifying the turbine housing where the exhaust goes through that area can be ground on and made to perform a little better then stock. Also another way to make the turbo perform better is if I use a billet compressor wheel but with the wheel mod it makes the turbo perform too much and starts to go over 15/20psi of boost pressure so the turbine housing mod is a better idea in my opinion. I rebuild these turbos but I cant sell you a rebuild on your turbo here on Ebay as Ebay does not allow such ways of doing business on Ebay site. I can make a listing for rebuild service and you could get your turbo rebuilt by me that way. I charge $310 when someone brings or sends the turbo to me but I think even with Ebay seller fees I can still rebuild your turbo for $310 including all balancing etc. I was already thinking to doing that if your interested I will get on making a listing. Ron
his e-mail is:
[email protected]
The non waste gated turbo is built off of the Garrett T04b turbo and Banks has the turbo made to only build lower boost pressures and I can get around that by modifying the turbine housing where the exhaust goes through that area can be ground on and made to perform a little better then stock. Also another way to make the turbo perform better is if I use a billet compressor wheel but with the wheel mod it makes the turbo perform too much and starts to go over 15/20psi of boost pressure so the turbine housing mod is a better idea in my opinion. I rebuild these turbos but I cant sell you a rebuild on your turbo here on Ebay as Ebay does not allow such ways of doing business on Ebay site. I can make a listing for rebuild service and you could get your turbo rebuilt by me that way. I charge $310 when someone brings or sends the turbo to me but I think even with Ebay seller fees I can still rebuild your turbo for $310 including all balancing etc. I was already thinking to doing that if your interested I will get on making a listing. Ron
his e-mail is:
[email protected]
Ok I talked to that gentlemen before my turbine snapped, I’ll reach back out and see if he can get the shafts too.
you ever get up with him? I've sent him a couple of emails but have not heard back.
No I never heard anything, I’m going to wait for the chra to come in April now. I haven’t found any info on modding the housing either.
