Chris Demartini
1/2 ton status
<font color=blue> I saw this on the Fabtech Motorsports site, and I was wondering if it would fit my 71 frame. It's meant for a 73-91 2wd chevy.</font color=blue>
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
will this shock hoop work on my truck?
- Thread starter Chris Demartini
- Start date
Ohhh I dig that!!!!! post the URL of where to order that. it will solve my shock problems.
Well the frames are close on the 71 to the 73-91. But that doesnt make it a garantee. Best thing to do is find a truck with the year that that is listed for and mesure the frame width and see if yours is the same in the area that is supost to attach. Make sure you also mesure how high the engine sits. it may create a clearance problem over the engine also. Check the location of the cross members also they may be differnt location and interfer with it.
Diging it in the dirt with my K5's
Grim-Reaper
Well the frames are close on the 71 to the 73-91. But that doesnt make it a garantee. Best thing to do is find a truck with the year that that is listed for and mesure the frame width and see if yours is the same in the area that is supost to attach. Make sure you also mesure how high the engine sits. it may create a clearance problem over the engine also. Check the location of the cross members also they may be differnt location and interfer with it.
Diging it in the dirt with my K5's
Grim-Reaper
Chris Demartini
1/2 ton status
<font color=blue>The url is http://www.fabtechmotorsports.com. I know the front axles from the 73-78 trucks will bolt up to the earlier frame, so the frame can't be that far off. The engine is low and far back, so it will clear the engine fine.</font color=blue>
