Mine are shot. I need a pair with no rust, pits, or blemishes. I cant bring myself to pay $75 each for anew ones. And I do think there is a difference between 3/4 ton and 1/2 ton spindels....you may correct me.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
WTB 3/4 ton D44 spindles
- Thread starter 8_YOUR_H2
- Start date
There is no difference between 1/2 and 3/4 ton spindles as long as they fit your bearing hubs.
The rule of thumb is: try to match the spindle to the hub by sticking with certain years. The years to watch for are '76 and older, which are called the "first design" and then the '77 and newer, which are the "second design".
I'm not picking my nose...I'm just pointing at my brain!!
<a target="_blank" href=http://coloradok5.com/gallery/thatK30guy>The K30 Collection</a>
The rule of thumb is: try to match the spindle to the hub by sticking with certain years. The years to watch for are '76 and older, which are called the "first design" and then the '77 and newer, which are the "second design".
I'm not picking my nose...I'm just pointing at my brain!!
<a target="_blank" href=http://coloradok5.com/gallery/thatK30guy>The K30 Collection</a>
