WTB: Stock front spring hangers. 73-80

[rockink5]

I'm looking for all the front factory 4wd spring brackets for a 73-80 frame.

Front hanger with body mount and bracket.
Front frame bushing eye for shackle.

Also looking for factory 4wd motor mount brackets that mount to the frame.

Let me know what you have. All these parts should fit in a large flat rate box.

 

[throttleissues]

Do youself a favor and get these instead of the stock brackets. They will fit with stock length lift springs but not factory springs, because factory springs are 3" at the bushing. That's what I'm using with 4" lift springs, since I broke all of the brackets in that cluster.
http://diy4x.com/cart/index.php?route=product/product&path=24&product_id=120

I probably have the engine mount brackets you're looking for also. I'll look and post pics of what I've got later.

 

[rockink5]

Do youself a favor and get these instead of the stock brackets. They will fit with stock length lift springs but not factory springs, because factory springs are 3" at the bushing. That's what I'm using with 4" lift springs, since I broke all of the brackets in that cluster.
http://diy4x.com/cart/index.php?route=product/product&path=24&product_id=120

I probably have the engine mount brackets you're looking for also. I'll look and post pics of what I've got later.

Cool.

The problem here is, I'm converting a 2 wheeler project that I've lost interest in. The truck is in the middle of a frame off restore, but I have decided to change direction. I have most of the parts need figured out, but i need the body mounts. I know of the B52, I didnt know that it would work with a non 52-56" spring. If I can find 4wd body mounts, i can make my own hangers.

 

[throttleissues]

Cool.
If I can find 4wd body mounts, i can make my own hangers.

I have 3 sets of those body mount brackets, and they're ALL broken (as well as 3 of the spring hangers). That's kinda why I was suggesting the B52s, but some people say I'm just too rough on my truck. I took some quick pics of the eng mount brkts, but I'll have to find the camera in the morning to post pics.

 

[throttleissues]

Sorry, I kinda forgot about this til now. Are the brackets you need for eng mounts the brkt from frame to crossmember, that the eng mount sits on?
IDK, how about $30 + shipping?

 

[70BlazerX2]

I have the 2 front radiator support/spring mounts..$30 shipped..I will get a pic today.

 

[K5Nate]

I can do the bushing eyes, and body mounts, actually any of it. I currently have a 1975 K20 frame that is bare and most likely going to be cut up and tossed. Let me know what you need. I can start on it tomorrow, pics if you need 'em.