I like it a lot!
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
1978 K20 farm truck "Boring maintenance phase"
- Thread starter 78K30
- Start date
1978 K20- Rusty beater farm truck
And it has air conditioning! Nice!
PS I actually like those old Fords too.
PS I actually like those old Fords too.
Hopefully I can get some time next year to get down to Tuttle and wheel with you guys and put it to use!
And it has air conditioning! Nice!
PS I actually like those old Fords too.
Friend that I bought it off of added that, we put the AC in before going to Missouri a couple years ago and it has paid huge dividends!
I also have a huge soft spot for 90's fords. I own two right now. This one has a 7.3 IDI and ZF5. It actually tows good, but obviously the LBZ does much better
OH man, that would be awesome!
Wheeling rig is just a solid axle swapped F150 on 35's so it's not the most capable rig ever but does hold its on also!
I expect and demand that both of you actually use the 4WD capability that your camping rigs are supposed to have.
Parking in the gravel lot doesn't cut it, I've done better than that in the Saturn.
Parking in the gravel lot doesn't cut it, I've done better than that in the Saturn.
A few weeks ago I went with a guy in a stock Montego.......you'll be fine haha.
I expect and demand that both of you actually use the 4WD capability that your camping rigs are supposed to have.
Parking in the gravel lot doesn't cut it, I've done better than that in the Saturn.
I've got a 4x4 diesel RV with mud terrains on it, sounds really impressive until you see what it actually is
Dude! So do I! lolI've got a 4x4 diesel RV with mud terrains on it, sounds really impressive until you see what it actually is
I've got a 4x4 diesel RV with mud terrains on it, sounds really impressive until you see what it actually is
That's the spirit!
Went to the Red Power Round-up with dad yesterday since it was local to us this year. It was a worthy distraction here's just a couple quick shots to prove i went. Dad is the guy on the left of this picture.
Some 1150 CAT goodness
And who doesn't like a Detroit.
After getting tired of the heat at the show I came home and continued to be outside in it for the sake of progress. Went and got my torch bottles filled then finally liberated the fuel tank and skidplate from the suburban so I can go get it off of the trailer.
I'll likely sell that skidplate to you @campfire, laziness would likely take over and I wouldn't put it on anyways.
Going to be delayed a bit on this project so I can work on my wheeling rig. Haven't wheeled it in a year due to being lazy about swapping rear axles and building the tube bed. Updates will be even slower yet her for a couple of weeks.
Some 1150 CAT goodness
And who doesn't like a Detroit.
After getting tired of the heat at the show I came home and continued to be outside in it for the sake of progress. Went and got my torch bottles filled then finally liberated the fuel tank and skidplate from the suburban so I can go get it off of the trailer.
I'll likely sell that skidplate to you @campfire, laziness would likely take over and I wouldn't put it on anyways.Going to be delayed a bit on this project so I can work on my wheeling rig. Haven't wheeled it in a year due to being lazy about swapping rear axles and building the tube bed. Updates will be even slower yet her for a couple of weeks.
Last edited:
beags86
Eastbound and Down
Build thread?
beags86
Eastbound and Down
Went to the Red Power Round-up with dad yesterday since it was local to us this year. It was a worthy distraction here's just a couple quick shots to prove i went. Dad is the guy on the left of this picture.
And who doesn't like a Detroit.
.
You suck.
I wish I could have went.
But I am still at work.
As in pushing hour 17 right now....
Who'd you piss off?
beags86
Eastbound and Down
Good question? I sure would like to know.
Yesterday was 17 hours, today will probably be 18, and tomorrow will be 12
Should round out to be around an 80 hour work week....
Yuck
beags86
Eastbound and Down
It won't be so bad when I call summit next Friday morning.....
Been running lots of OT lately. Does help that parts deal
I can likely just cabbage onto this thread for a couple days. The F150 won't get worked on much, hell its taken me a year of having the tube and bender sit around
