CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
1982 C/K 6.0L Caitlyn Mall Crawler (Interior time)
- Thread starter Babaganoosh
- Start date
I still have a ton of shit to do... tomorrow is
Your cooler is farther back than mine, must be a difference in rad supports. I need to hack the living $hit out of my grille to make it fit over the cooler.
What year is your grille? Maybe the 91 is pushed back.
84
I think I'm going to have to cut out the center support and weld in another offset to the drivers side.
I think I'm going to have to cut out the center support and weld in another offset to the drivers side.
Weird, at the bash we can take a look and see what the difference is.
Wish I was going to the bash..
Gov lock works, seems pretty tight, almost sounds like a locker. For some reason i don't know if it's the gov lock but it kind of seems like it goes into neutral and lounges... I did have the battery disconnected for a month.
Those gov locks lock pretty hard in the bigger axle.
Well I found my issue I believe, it is jerking randomly and has no trans output it seems.
Watching the gps speed vs the vss output speed the vss randomly will jump all over the place and be sporadic then smooth out and it's all fine and dandy.
Watching the gps speed vs the vss output speed the vss randomly will jump all over the place and be sporadic then smooth out and it's all fine and dandy.
454Sub
5/8 ton status
That is definitely the problem
Yea, can't have that, the ecu/tcm finds that particular reading quite important.
Wiring good? Ground to trans tight? I typically have speed sensors just stop picking up a signal. I cant say I've had one come and go.
Wiring good? Ground to trans tight? I typically have speed sensors just stop picking up a signal. I cant say I've had one come and go.
Last edited:
Might be getting interference from something also.. are the wires twisted all the way to and from it?
Yes they are, didn't have this problem before I parked it a month or so ago. I'm going to order a new sensor tomorrow and see what happens. Wiring should be good.
New sensor is on my desk woohoo.
and that helps me how?
Allows the trans to shift and I don't have to bum a seat off you again haha.
