y5mgisi
1 ton status
Awesome!
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
1982 C/K 6.0L Caitlyn Mall Crawler (Interior time)
- Thread starter Babaganoosh
- Start date
Yup I think I have 3 weekensd before the springs arrive.I plan on making it ready to install the front axle besides the rear hangers to dial in the angle.
I know right, I will be working on it much more know that work on my house is on hold for months.
I wish I wasn't so slow at things, what would take someone a hour might take me three. Trust me guys I'm waiting myself. Not sure if I have posted this but I want it running and driving by November so I better get my butt in gear.
Thank you Watsons. 
Ooooo! bilstiens and new mounts. which shocks are those. id like to replace my factory quad setup
They are the 5125's valved for a F250.
I'm lacking the motivation to go outside today. It's nice to be inside and not outside working like I do for a living.
I'm lacking the motivation to go outside today. It's nice to be inside and not outside working like I do for a living.
Tomorrow is a different story on motivation.... I got way to many parts in my room and I ended up kicking one of them.
I have a oil pan, valve covers, shackle flip, 3 sets of shackles, 2 front shackle brackets, over head console, 2 shock mounts, 2 shocks, brake lines, steering arm, engine harness, on my tv stand I have a MAF sensor, engine pcm and a floor board piece for the tcase shifter.
I have a oil pan, valve covers, shackle flip, 3 sets of shackles, 2 front shackle brackets, over head console, 2 shock mounts, 2 shocks, brake lines, steering arm, engine harness, on my tv stand I have a MAF sensor, engine pcm and a floor board piece for the tcase shifter.
drew4x4
1/2 ton status
i know how it is!!!
my spare bed room has.... couch, bed, one inch ord body lift, fuel tank, skid plate, hella driving lights, digital guages, spicer ball joints, ord cross over steering, psc 2wd box, new dash, vents, painless chassis wiring harness..... its sort of organized
my spare bed room has.... couch, bed, one inch ord body lift, fuel tank, skid plate, hella driving lights, digital guages, spicer ball joints, ord cross over steering, psc 2wd box, new dash, vents, painless chassis wiring harness..... its sort of organized
It's funny how these truck parts end up in the house and not that garage where they belong.
y5mgisi
1 ton status
ORD sells ducks, mini pistols, deer coasters and sheriff badges now?!
drew4x4
1/2 ton status
hahahha.... where's the duck gunna go on the blazer?
hood ornament?
hood ornament?
Well I managed to mess up painting today and goofed it all up, I just wasted about 4 hours of painting.
I'm just going to get it powder coated, anyone want 6 cans of paint?
I'm just going to get it powder coated, anyone want 6 cans of paint?
drew4x4
1/2 ton status
how did you mess up painting? .... so we don't make your mistakes of courselol
Where do I start haha
1. I had a big run in it and mostly got it out by applying more paint.
2. primer came out splotchy my fault for not shaking it up good.
3. I wasn't paying attention to time and decided to flip parts and they stuck to the paper.
4. The wind decided to pick up and get dirt in the parts.
Pretty much anything that could go wrong went wrong.
1. I had a big run in it and mostly got it out by applying more paint.
2. primer came out splotchy my fault for not shaking it up good.
3. I wasn't paying attention to time and decided to flip parts and they stuck to the paper.
4. The wind decided to pick up and get dirt in the parts.
Pretty much anything that could go wrong went wrong.
DOH! Sounds like stuff I did when I was young and in a rush.
At least your build thread is getting comments. Every time I open mine, all I hear is tumbleweeds and crickets.
Well I wasn't really in a rush but spacing out looking at the clouds I lost track of time and so I rushed it. I should have been paying closer attention to time in between coats.
