1982 C/K 6.0L Caitlyn Mall Crawler (Interior time)

[K30Blazer]

Dayum. That's some strong work right there. What I find amazing is how totally destroyed engines and trans can be and still function. Definite testament to their durability and also the fragility sometimes.

Get that new one in and do some burnouts

 

[Babaganoosh]

Dayum. That's some strong work right there. What I find amazing is how totally destroyed engines and trans can be and still function. Definite testament to their durability and also the fragility sometimes.

Get that new one in and do some burnouts

Consider this done.

I thought I'd read that the bolts can be too long - going through the flexplate into the torque converter - and if so they can dent the housing causing some internal damage. Might be something to look at.

I used GM bolts though?

 

[campfire]

Dayum. That's some strong work right there. What I find amazing is how totally destroyed engines and trans can be and still function. Definite testament to their durability and also the fragility sometimes.

This.

Get that new one in and do some burnouts

And this.

 

[Team208Motorsports]

Dayum. That's some strong work right there. What I find amazing is how totally destroyed engines and trans can be and still function. Definite testament to their durability and also the fragility sometimes.

Get that new one in and do some burnouts

It is amazing. Baby Bomber ran over 300 degrees at the trans the entire EMC race. Still got second. LOL. Limp mode every few min didnt help.

 

[Babaganoosh]

It wouldn't shift but first gear worked great haha.

If you look closely you can see the metal in the bottom of the pan.

 

[blazinzuk]

That's the metal that was in there???

 

[campfire]

That's the metal that was in there???

This.

 

[Team208Motorsports]

If you look closely you can see the metal in the bottom of the pan.

Eeeek. There's yur problem right there...... You used grinder dust as lube.

Tried that on an engine once..........

 

[Babaganoosh]

Yes, I told you guys it was messed up. You guys didn't believe me it was that messed up. First time I dropped the pan I told my brother lalalalala it's not going to last we will see.

 

[Babaganoosh]

This.

That's the metal that was in there???

Here is a close up.... WTF

 

[82355]

Just looks like a blurry picture to me.

Martin

 

[Babaganoosh]

It's a zoomed in screen shot.

 

[GWeakland620]

And they are pan bolts...

 

[campfire]

And they are pan bolts...

I will admit that I was looking at the bolts in the first pic. That's why I went

Moral of the story: High-quality pictures. So all yer internet friends don't get confused.

 

[skunked]

I didn't see $hit, just bolts in a pan but I figured there was some hooker glitter in there

 

[82355]

It's a zoomed in screen shot.

I get that.

All I see is a transmission pan, with pan bolts in it. The picture is far too blurry to make out anything else.

Martin

 

[GWeakland620]

*is

 

[campfire]

*is

Grammar Nazi STRIKES AGAIN!!!

 

[82355]

That is a spelling error, not a usage error.

Marti

 

[blazinzuk]

Yah I thought it was the trans bolts but even in that fuzzy pic .

That's alot of debris