Truck bed full of trash and broken shock replaced... Only broke it sense last September.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
1982 C/K 6.0L Caitlyn Mall Crawler (Interior time)
- Thread starter Babaganoosh
- Start date
Got the truck back on the road then parked it, hasn't moved. The new job has me working which is good.
Took the truck out, new tcase can go up to 84 vibration free, old one it vibrated bad at 74 I just thought it was the pinion angle.
Was hitting some whoops near my house at 35 this truck seriously needs deavers, air bumps and bypasses....
I did start to self clearance the shock again... I have ruff stuff u bolt plates, can I safely cut away a inch off and flap wheel it away from the shock?
Was hitting some whoops near my house at 35 this truck seriously needs deavers, air bumps and bypasses....
I did start to self clearance the shock again... I have ruff stuff u bolt plates, can I safely cut away a inch off and flap wheel it away from the shock?
Echoed
I'll have to take a picture and post up, to me it sounds fine but I don't want to take away the integrity of it.
Just trying to get by until I get some new suspension in the rear.
Just trying to get by until I get some new suspension in the rear.
Cut it. I cut down my huge DIY4X plates. Just check your u bolts every now and then.
There’s a guy selling Deavers onnthe gram for 200$ his are on a stepside
I got mine off CK5 a few years ago for a song. Taller than I wanted but couldn’t pass the deal
Cut then add bump brackets
If I had my way, deaver, air bump and bypass...
All you need is a little help from your friends.
Unfortunately they won't sponsor me and make it affordable right now.
Hopefully this works. Looking at the pictures I think it was the ubolt not the plate, they both got cut so it should be good.
I'm shocked you didn't blow a seal on your shocks...
Me to, in Moab I ripped the bottom out.
Today it got beat on harder then it ever has... 6k rpm doughnuts and 50+ through foot tall whoops at times. All the bumps stops got used. I had my cousin drive it which races offroad and he was able to do things in it that I'm not able to do...
Can't wait to do a solid suspension in the rear it's going to be incredible and will need caged. It's borderline as is.
I guess that I should have apologized to that t-case when I packed it in the box.
It didn't know what was in store!
It didn't know what was in store!
This makes me happy
sent it fully
I guess that I should have apologized to that t-case when I packed it in the box.
It didn't know what was in store!
You know I was going to let you know it has been treated well...
