Sold 1985 GMC K1500 Suburban 6.2L diesel

[kennyw]

Nearly rust free body. I still need to check if it will run to test the drivetrain. I need AC parts from the engine and firewall.

Front doors SOLD
Rear passenger doors SOLD
Cargo doors $100/pair
Passenger fender SOLD
Driver fender $20
Hood $50
Core support $50
Inner fenders $50/pair
Door panels SOLD
Dash pad SOLD
Front seats SOLD
Console SOLD
Seatbelts SOLD
Gauge cluster SOLD
Gauge bezel SOLD
Middle row seat SOLD
3rd row seat, MISSING
Rear quarter glass SOLD

700R4 SOLD
NP208 SOLD
Front driveshaft SOLD
Rear driveshaft $50

Anything else, just ask.

 

[gone huntin]

How much for center console and the front seat mount brackets that are tacked to the floor to a business in 38668?

 

[85-K5Blazer]

If @gone huntin does not want the console, I would be interested in it. Also would like to see a better picture of the Dash Bezel as I would be interested in that as well to go on my 85 K5 6.2L - Business Zip 77701
Thanks

 

[kennyw]

How much for center console and the front seat mount brackets that are tacked to the floor to a business in 38668?

If @gone huntin does not want the console, I would be interested in it. Also would like to see a better picture of the Dash Bezel as I would be interested in that as well to go on my 85 K5 6.2L - Business Zip 77701
Thanks

I will get it in the shop this weekend to see if it is a runner before I start selling parts. However, things like consoles and dash bezels are going to cost more to ship than they are worth to most people before I charge you what the part is worth.

 

[kennyw]

If @gone huntin does not want the console, I would be interested in it. Also would like to see a better picture of the Dash Bezel as I would be interested in that as well to go on my 85 K5 6.2L - Business Zip 77701
Thanks

I have one diesel bezel already pulled but cut for a radio. $10 on this one and I would expect shipping to be over $50 and I'm not sure if I need to buy a box yet.

 

[85-K5Blazer]

Thanks for the update ... I have the Silverado Pkg so the Bezel would need the aluminum finish. If you end up parting out, and it is in good shape and not cut at the radio section, I would understand the total price due to shipping.

Thanks,

 

[kennyw]

Thanks for the update ... I have the Silverado Pkg so the Bezel would need the aluminum finish. If you end up parting out, and it is in good shape and not cut at the radio section, I would understand the total price due to shipping.

Thanks,

It is not cut or cracked that I saw on a quick check but the aluminum overlay is not in the best shape.

 

[85-K5Blazer]

Thanks ... that's the issue with mine, the overlay is in bad shape ... trying to find an original. I will probably have to purchase a repop overlay and go that route.

I appreciate the help as always.
Rob

 

[Aramos3]

If you decide to part out I am interested in the oil cooler hard lines that run across the radiator and the rubber lines from the driver side to the side of the block above the oil filter.

 

[kennyw]

If you decide to part out I am interested in the oil cooler hard lines that run across the radiator and the rubber lines from the driver side to the side of the block above the oil filter.

I have the set off the 85 K10 I just took apart. I can pics in the morning.

 

[Aramos3]

I am interested send me pics in the morning.

I have the set off the 85 K10 I just took apart. I can pics in the morning.

 

[4X4ForDad]

I would be interested in the air filter case and the cold air snorkel along with the cruise control. Let me know if you part it out. It will go on my CUCV 6.2

 

[4X4ForDad]

What the heck...I'll go for the steering column also. BTW, mine is a 1986 so they should fit.

 

[85-K5Blazer]

I would be interested in the air filter case and the cold air snorkel along with the cruise control. Let me know if you part it out. It will go on my CUCV 6.2

If @kennyw does NOT part out the truck, I have a Air Filter, Snorkel Hose and core support piece off a 1983 6.2L Suburban that should fit available. Once you know what Kenny will do send me a message.

 

[kennyw]

If you decide to part out I am interested in the oil cooler hard lines that run across the radiator and the rubber lines from the driver side to the side of the block above the oil filter.

I am interested send me pics in the morning.

The hard lines are in good shape, the rubber lines so signs of leaking like they all do. $40 for the set plus shipping and I have a box that will work on hand.

 

[kennyw]

I would be interested in the air filter case and the cold air snorkel along with the cruise control. Let me know if you part it out. It will go on my CUCV 6.2

What the heck...I'll go for the steering column also. BTW, mine is a 1986 so they should fit.

If @kennyw does NOT part out the truck, I have a Air Filter, Snorkel Hose and core support piece off a 1983 6.2L Suburban that should fit available. Once you know what Kenny will do send me a message

I am going to use the air snorkel on one of my trucks.

I have the cruise control setup on the engine above along with the full wiring harness $40 plus shipping. I also have another 84-91 auto w/ tilt column already pulled for $100 plus shipping but the tilt is sloppy and requires the internal bolts to be retorqued.

 

[Aramos3]

@kennyw I will take them PM incoming.

 

[kbclamper]

How much for vin and paperwork

 

[Chuy84k5]

How much for the rad support brackets to 76574

 

[kennyw]

How much for vin and paperwork

That all has to go to the scrap yard when I scrap the remains when I am done pulling parts, they won't take it otherwise.

How much for the rad support brackets to 76574

$60/pair shipped without the plastic filler panel. I have one set off and ready to go.