Checking back ... Will you be selling the complete set of Alternator brackets ?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Sold 1985 GMC K1500 Suburban 6.2L diesel
- Thread starter kennyw
- Start date
Since I have more than one spare now, I can sell the set in the motor that is already pulled.
Sounds good ... Priced out to 77701
Also, ... I see on this engine the oval resonator frame that holds the resonator going into the Air filter housing .... Some of the 83 6.2L piece I obtained in a salvage yard is the Round one like shown in your earlier pictures.
I am in dire need of the tube that goes into the resonator from the radiator core support frame ...
If you have one for sale, let me know ... if you have a good one and do not want to sell it ... can you take pictures and send dimensions so I can try to make one as close to factory as possible.
Also, ... I see on this engine the oval resonator frame that holds the resonator going into the Air filter housing .... Some of the 83 6.2L piece I obtained in a salvage yard is the Round one like shown in your earlier pictures.
I am in dire need of the tube that goes into the resonator from the radiator core support frame ...
If you have one for sale, let me know ... if you have a good one and do not want to sell it ... can you take pictures and send dimensions so I can try to make one as close to factory as possible.
The one on this Suburban does not appear to be factory and I do not have any of these to sell. I can get some measurements though.
The price on the Alternator Bracket is good .. I'll take it .. I believe I have your payment information from the past.
I will PM you with Shipping Address later today ...
On the Resonator .. That is factory on the 1983 Suburban I cannibalized one at the salvage Yard ... . and it is exactly the same .. Where the metal input goes into the core support there is a plastic piece with four tabs that hold it in place. you have to remove the that piece from the grill side by turning it a quarter turn or so to release the tabs in to relief holes. There may be some modification on the plastic piece at the core support from the 83 to the 85 but almost identical.
The 6.2L in the 85 Blazer had a Oval Plastic resonator and the connecting pieces was solid plastic going from Oval at the Resonator to Circular at the connection point on the Core Support ... I will try to see if I can find some pictures of my configuration. Blazer is at Paint and body and I cannot get to it till next week .
Thanks for the help as always !
I will PM you with Shipping Address later today ...
On the Resonator .. That is factory on the 1983 Suburban I cannibalized one at the salvage Yard ... . and it is exactly the same .. Where the metal input goes into the core support there is a plastic piece with four tabs that hold it in place. you have to remove the that piece from the grill side by turning it a quarter turn or so to release the tabs in to relief holes. There may be some modification on the plastic piece at the core support from the 83 to the 85 but almost identical.
The 6.2L in the 85 Blazer had a Oval Plastic resonator and the connecting pieces was solid plastic going from Oval at the Resonator to Circular at the connection point on the Core Support ... I will try to see if I can find some pictures of my configuration. Blazer is at Paint and body and I cannot get to it till next week .
Thanks for the help as always !
Here is what my resonator looks like and the second picture shows going into the core support ... This piece was hard plastic and snapped into the groves on each side. This would allow it to "float" or rotate to some degree to line up everything when it was time to bolt it up.
The console was a bonus, I really need those seat brackets so we can mount my son's bucket seats in his truck.
I have these resonator pieces that you want
Can you send pictures via Direct Message .... definietly needing the tube from the resonator to the piece on the core support.
Thanks !!!
I hate ask how much for the engine
The one is this burb is still unknown condition. I haven't had a chance to pull it in the shop yet. The one I pulled from the flooded pickup, I'm planning to keep a a spare at this point if it is good.
It is going to be a few weeks before I decide if I'm ready to cut up a rust free floor. Here is a set ready to go on ebay (I don't know the seller).
1973-91 Chevy Squarbody Suburban C/K Front Bucket Seat Mounting Bracket Set OEM | eBay
Find many great new & used options and get the best deals for 1973-91 Chevy Squarbody Suburban C/K Front Bucket Seat Mounting Bracket Set OEM at the best online prices at eBay! Free shipping for many products!
www.ebay.com
Received the Alt Brackets... Thanks !!!
Bumperettes to 85742?
It looks like they have taken a hit in the past but appear in good shape other than damage to the plastic. $30 for the pair plus shipping. Worst case shipping likely $20 for a large flat rate but I will not have exact shipping until they are pulled.
Sounds good. Let me know when you pull them. Thanks.
First post updated.
$100 shipped assuming they are all in good condition but I will verify condition.
