You have one you can get rid off or know where to get one? I cant find them anywhere
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
203 flange:
- Thread starter TJ1978
- Start date
You have one you can get rid off or know where to get one? I cant find them anywhere
Is this price for real, if this is what they go for. Im just going to use what I have and keep an eye for a used one
https://torqueking.com/product/30107/qu30107-nla-gm-30-spline-front-cv-flange-yoke-for-np203-np205/
https://torqueking.com/product/30107/qu30107-nla-gm-30-spline-front-cv-flange-yoke-for-np203-np205/
he gets GOLD prices for a lot of his stuff .
post up a wanted add or take up @imiceman44 on his offer or that speedi-sleeve i showed you it will be fine . .
https://www.northerndrivetrain.com/product/PTI-3301-201.html
Double check the measurements.
But I think this one will work.
Maybe is rear says 32 spline
Double check the measurements.
But I think this one will work.
Maybe is rear says 32 spline
he needs stock 30 spline front . and this one you linked wont work with stock front shaft . the centering lip for the flange is to small .
Yeah Northern showed a 30 spline, but it seemed to be for 1410 CV joint
http://www.driveshaftsuperstore.com/Drive_shaft_custom_flanges.htm
30 spline Saginaw Chevy flange 1 3/4 seal surface 2" thru hole 1.3 inside diameter -- $165.00
3 1/8 " pilot
30 spline Saginaw Chevy flange 1 3/4 seal surface 2" thru hole 1.3 inside diameter -- $165.00
3 1/8 " pilot
I may take @imiceman44 up on his offer...
Cleaned and wire wheeled the Tcase, will paint black later today...
What should be covered so no paint? Shifter pieces speedo hole, front splines? What else?
Cleaned and wire wheeled the Tcase, will paint black later today...
What should be covered so no paint? Shifter pieces speedo hole, front splines? What else?
Last edited:
Just cover the mating surface and speedometer hole, shifter pieces don't matter
This just popped up in local offer up, hmm?
How many 203’s can I own? Seeing as that flange is like $165-$250 this might be worth it... hahahaha
How many 203’s can I own? Seeing as that flange is like $165-$250 this might be worth it... hahahaha
I would check the flange first.
wasted wages
1 ton status
Actually I do have one sitting on the shelf in my shop down in Houston.... but I live in Dallas, and I don't have a trip planned down there anytime soon.... otherwise it would on its way to you...
Welp, if you ever.... shoot that dm. If nothing turns up Ill just run what I have.
He says 83” K5 splin he doesn’t know..... Im sure my impact can get that nut loose to get that flange. “Ran fine before pulled” hahahah never heard that before.
I need a 30 spline
SO hear me out:
The Input (to the trans) spline. If its a 32 spline, its from behind a TH400, and is still fairly desirable to use the range box in a Doubler
The ouput (front) you will have to pull. I personally only ever found those flange types on a 30 front output
The Input (to the trans) spline. If its a 32 spline, its from behind a TH400, and is still fairly desirable to use the range box in a Doubler
The ouput (front) you will have to pull. I personally only ever found those flange types on a 30 front output
I messaged him if he knows the spline for input to trans
Th350 he believes a 27 spline....
It may be worth $50 to just get that flange I can clean it up. Worth it ya think?
It may be worth $50 to just get that flange I can clean it up. Worth it ya think?
If you need the flange, I want $30 plus the shipping.
Those prices are crazy and I never buy them for that much.
I have parted a couple dozen trucks and I still have a few parts left...
