lol
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
3/4 Ton Swap is DONE: **d-shaft question**
- Thread starter Avery4jc
- Start date
sandawgk5
3/4 ton status
thatK30guy said:Other than being an attention whore and a know-it-all, you sure used up quite a bit of bandwidth on this site with your pics.
Last time I checked Stephen did not put a bandwidth limit on our memberships and your argument is no good as you have also supported the wasting of said bandwidth by posting over and over aboot locking this thread.
.Almost forgot to PAD while I was here to waste more bandwidth
.Ira
beater_k20
Banned
yeah! what Paddy McPaddington said! 
MuddinManny
Banned
Avery4jc said:EDIT: IF YOU ARE READING THIS THREAD FOR THE FIRST TIME THERE IS A BUNCH OF JUNK IN THE FIRST FEW PAGES...THE DECISION TO GO AHEAD AND SWAP STARTS A COUPLE PAGES IN WITH THE DRAMA TO FOLLOW-Avery
This is my very first time seeing this thread. Good thing I don't hafta work tomorrow! Manny
Oh god...manny you have some serious reading to do!
Have fun...
Have fun...
Chrisblazzer89
1/2 ton status
Hey Avery did u find out about shipping that trus?
MuddinManny
Banned
Avery4jc said:
I made it to page 2 Avery and had to stop. I couldn't focus anymore. So far, I cannot see why the thread needs to be locked. It seems simple enough. You decided a change, worked an agreement, your $$$ source fell through, you want to sell you truck to make the difference, install some running gear to make it more attractive. Then you start to wanna keep it.
Seems simple enough. I'll read more tomorrow.
When are you arriving in Texas? I'd like to hook up with you. I don't mind taking a drive and I'd like you to see my truck.
Manny
sandawgk5
3/4 ton status
MuddinManny said:
Oh you have no idea my friend no idea
. When you read it keep an open mind and read all the way to the end. When that is all said and done and you still feel it necesarry you have my permission to kick Avery in the nutsIra
MuddinManny
Banned
Ira,sandawgk5 said:Oh you have no idea my friend no idea
Ira
Any man who has a shaggy dash mat and a candy cane strip drive shaft needs mercy and compassion,
I don't understand why Avery gets the shaft every time he posts. I don't understand either why everyone is ragging on him about doing something he's never done before. Dang! I never tore a Chevy apart before either. Everything in my post is a first time around event too!
One thing I have been seeing with the younger crowd: They make decisions before they think things through or get a good workable plan. They also seem to be persuaded easily off what little plans they have. Is this happening here. Juries still out...
Avery, I'm with ya bud. Lemme get through this post before I give my 2 cents worth, or ask for a refund.
Manny
sandawgk5
3/4 ton status
MuddinManny said:Ira,
Any man who has a shaggy dash mat and a candy cane strip drive shaft needs mercy and compassion,, not a kick in the nuts.
I don't understand why Avery gets the shaft every time he posts. I don't understand either why everyone is ragging on him about doing something he's never done before. Dang! I never tore a Chevy apart before either. Everything in my post is a first time around event too!
One thing I have been seeing with the younger crowd: They make decisions before they think things through or get a good workable plan. They also seem to be persuaded easily off what little plans they have. Is this happening here. Juries still out...
Avery, I'm with ya bud. Lemme get through this post before I give my 2 cents worth, or ask for a refund.
Manny
Just finish reading first. Avery and I are cool he has made things right as far as I am concerned.
Ira
beater_k20
Banned
MuddinManny said:
its his attitude really. he asks for help, then when he is told how to do something, he ignores the advice he is given, no matter what the consequences. hell, he drove the truck for a week with a grade 2 carriage bolt for a spring pin, despite being told that it needed to be fixed as it was a major safety concern. he's got all done right now. he's a good kid, just a little bullheaded, and needs to learn when to shut up and listen to what he's being told for his own good.
mmmmm locker....
well I'm at school...the truck ran great this morning!
well I'm at school...the truck ran great this morning!
sandawgk5
3/4 ton status
Avery4jc said:
Dont forget to recheck everything for the next couple of days. Things seem to work loose from vibs when first reinstalled.
Ira
ok...I'll re-torque the u-bolts and check the bolts on everything else...
I noticed the rear loosened up the first week I drove on it so I bet the front will do the same.
I noticed the rear loosened up the first week I drove on it so I bet the front will do the same.
NEK5
3/4 ton status
Yea, I did it once every 2 days for like 2 weeks when I swapped axles....Avery4jc said:ok...I'll re-torque the u-bolts and check the bolts on everything else...
I noticed the rear loosened up the first week I drove on it so I bet the front will do the same.
yeah I've never understood why you swapped a 10b back in...you just did the rear correct?
NEK5
3/4 ton status
No, front and rear. I was in a bind, and that was my only choice to get the truck moving again....Avery4jc said:
MuddinManny
Banned
Man, my eye's hurt and I'm only at the beginning of page 7.
Avery, we have to talk, son. Guys' y'all are vicious with personal attacks.
If this doesn't end up in a who dunnit murder mystery, then Avery, you need to write an Agatha Christi type novel and make a fortune. Just don't use any instrument that has removable parts that can break. We don't want you putting a pen spring in upside down and not get the proper valving affect of the ink, nor torture the paper with improper pressure! I won't even think about an old fashioned No 2. pencil.
I need a stiff belt.
Manny
Avery, we have to talk, son. Guys' y'all are vicious with personal attacks.
If this doesn't end up in a who dunnit murder mystery, then Avery, you need to write an Agatha Christi type novel and make a fortune. Just don't use any instrument that has removable parts that can break. We don't want you putting a pen spring in upside down and not get the proper valving affect of the ink, nor torture the paper with improper pressure! I won't even think about an old fashioned No 2. pencil.
I need a stiff belt.
Manny
MuddinManny
Banned
Avery, that quote is a signature line if ever I saw one. Please don't talk about waxingyourjimmy, bald tires and rears again. I can't stand the laughter!Avery4jc said:
