35-37s without trimming?

[MTBLAZER89]

I have 33x12.5x15 on my truck now, stock suspension, and my tires have never rubbed..

Tho one when making tight right turns hits my pitman arm, is that a normal problem?

Then you just haven't tried hard enough

A lot has to do with backspacing and rim width. 4" of backspacing and an 8" wheel will keep everything in the fender better, but I bet they will still rub.

 

[rjpastor]

Did the 4" lift yesterday. Until it settles, I've got about 5-5.5 inches of lift. My 35s on 10 inch wide rims aren't even close to rubbing.

 

[blazerboss 85]

ive got a 4 inch on ly blazer with 35s and i dont rub at all

 

[supersize75k5]

4inch springs plus zero rate =5 inch lift..no trimming


these tires measure out around 37 inches.


keep the tires skinny and tucked in and your fine

yes it rubbed a little bit but did not do so to the extent that anything got damaged.

 

[86-1ton]

i had 35's on my stock crew cab this summer... no lift, hell the front springs are sagged like 2 or 3 inches... the only reason i went with a lift is because the fronts were sagged and the rears broken...

i plan on running 38's when it's all said and done, with my 4" lift... and yeah, i don't mind trimming the fenders...

 

[dsmd58]

im running 38's on 5 inches of alcan spring lift, trimming in the front...none in the rear, cause i added zero rates to fix the SBS

 

[chaser0517]

I'm runnin 35s with 4" Pro Comp Springs and a 3" body lift.
I have a ton of room.