I'm looking for a engine cross member and motor mounts for a 4wd conversion. Let me know what you got.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
4wd engine cross memeber and mounts
- Thread starter Babaganoosh
- Start date
is the 50 for the mounts and cross member? Also can you provide pictures?
Pics in a few minutes.
And yeah $50 covers the cross member and engine mount base.
If you want the actual mounts, I have those too for an additionnal $25.
I would have sold these cheaper if it didn't take for ever to grind the rivets off.
BRB
I know how you feel, I have both of these sitting outside.. but i have no means of pulling the engine for the mounts and frankly I'm tired of removing rivets... I'm not sure if the frame would go nuts if I removed the engine cross member.
Here you go:
And no this is not rust on there just some caked mud 
The rubber mounts are nice and tight.
The rubber mounts are nice and tight.
Is the cross member bent/dinged or is it just the illusion from mud?
If it look bent, it's an illusion, I have another one too in black.
I will inspect very carefully before sending if you want it, I will snap a few close ups too so you know what you are getting.
how much for shipping to a home address for 85027?
I'll take your word on it, no further pictures needed on what I'm getting. I believe in a mans word.
I'll take your word on it, no further pictures needed on what I'm getting. I believe in a mans word.
I will check and get back to you.how much for shipping to a home address for 85027?
I'll take your word on it, no further pictures needed on what I'm getting. I believe in a mans word.
with or without the engine mounts?
I will take them both.
OK, cross 4wd cross member plus the slanted engine mount bases $50
engine mounts proper $25
shipping Fedex ETA end of business day 2 $25
If that is OK with you, PM me your info and method of payment.
I can have this ready for shipment as soon as I recieve an OK from you.
by the way I cleaned up the cross member that I took a pic of and it had a small crack, which you could easily weld, but since I have another I am shipping the other.
Pics in a few minutes.
engine mounts proper $25
shipping Fedex ETA end of business day 2 $25
If that is OK with you, PM me your info and method of payment.
I can have this ready for shipment as soon as I recieve an OK from you.
by the way I cleaned up the cross member that I took a pic of and it had a small crack, which you could easily weld, but since I have another I am shipping the other.
Pics in a few minutes.
OK bad news.
Let me know what you want to do:
Here are the pics, both pieces have the same crack, I am willing to bet it's a common weak point and most people don't even realize they have it, and now that the piece is out is easily repaired, I will take out $10 for you fixing it if you still want it.
So $90 shipped to you:
Let me know what you want to do:
Here are the pics, both pieces have the same crack, I am willing to bet it's a common weak point and most people don't even realize they have it, and now that the piece is out is easily repaired, I will take out $10 for you fixing it if you still want it.
So $90 shipped to you:
I don't have a welder or the means to weld it up unfortunately.
Well I could do that then and I'll post pics after.
I might wait and see on the cross member. Are you looking to get rid of these in a hurry? It might be until next weekend I can inspect the one I have.
I just found out I have to replace the fascia board on the house tomorrow before they roof it.
I just found out I have to replace the fascia board on the house tomorrow before they roof it.
I have had them for a while, and they will be here until someone wants them, all my frames are already 4wd.
I will weld these and have them ready for any potential buyer.
No worries here.
I removed my cross member and it seems perfect. you wouldn't happen to have a removable trans tunnel for a automatic 4wd single cab would you?
What tcase?
