CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

72 GMC 2500

Fairly clean slightly beat up farm truck
Did ball joints on this last night. I’ve never seen a 10 bolt front with this bad of ball joints.

IMG_0389.jpeg
 

Attachments

  • 42B93ED3-4682-477A-83AE-EE84AC216B70.mov
    12.9 MB
The front is a kit from tinwork fab. The rear uses the factory 72 GMC springs, but they look to be the same as 52” 73-87 springs. I will be doing a similar swap on a 69 c10. I plan to remove all of the rear suspension (trailing arms and coil springs) and swap it with leafs from a 73-87.
 
The front is a kit from tinwork fab. The rear uses the factory 72 GMC springs, but they look to be the same as 52” 73-87 springs. I will be doing a similar swap on a 69 c10. I plan to remove all of the rear suspension (trailing arms and coil springs) and swap it with leafs from a 73-87.
yes,the coils are not much good except forthefreeway. If you have the frame leaf spring mounts, you are good.
My 71 sub has the reversed front leafs stock I think. it is now a big block .
your build is well done.
 
yes,the coils are not much good except forthefreeway. If you have the frame leaf spring mounts, you are good.
My 71 sub has the reversed front leafs stock I think. it is now a big block .
your build is well done.
Thank you!
 

Latest Posts

Top Bottom