TheBeast_88K5
Banned
Aww, c'mon.... You know you want the wedgie-strap... 



On the edge of my seat again. Be sure to show here you drill & tap the holes in the gear box. I've seen different locations on various threads.![]()
Looks good! Did you make the mount on your axle? Also, how did that mod work out on the pump? Lookin good, Im about 2 steps behind you.


Hha thanks. Those are cranked 110 welder flux core welds even. The lines should be plenty long. My suspension is fairly drooped in that pic as well.
Sweet. I've never had too much luck with one of those. What brand did you use?
Yeah i made the mounts with my trusty cut off wheel. I still dont have fluid in it so no clue how it works yet. I still need to figure out the reserve fluid situation
For the fluid reserve I recommend getting a cooler like this one for $20:
Link: http://www.oreillyauto.com/site/c/d...ck=Search_05146_1158791_-1&pt=05146&ppt=C0031
Then, using the 3/4" line you can connect it to a reservoir can like the one I have. View attachment 122698
It is from a '82 diesel stock power steering pump with the separate reservoir can. Run the line from the cooler, to the can, then back to the pump.
For the fluid reserve I recommend getting a cooler like this one for $20:
Link: http://www.oreillyauto.com/site/c/d...ck=Search_05146_1158791_-1&pt=05146&ppt=C0031
