CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
73 K20....crossmember time
- Thread starter wetoolowdingbangow
- Start date
How does one fill said box with grins?
I understand how to get the sh!ts in there...
wetoolowdingbangow
1/2 ton status
Haha is this phone really that smart? It's pretty knew but it's coming around. Took forever for it to learn curse words!
wetoolowdingbangow
1/2 ton status
The command center.
Looks good! What seat is that?
wetoolowdingbangow
1/2 ton status
Summit brand of course!
Great seats. They come apart so you can wash them. They hug pretty well. Probably not friendly above 220lbs lol.
I think they were 160 bucks each.
Awkward
Thought about some summit seats. Sounds like they're for people a little less 'round' than myself.
wetoolowdingbangow
1/2 ton status
Lol I had to check to see if thats what I said.
Yeah im about 220 and its snug lol. I need to slim down some.
wetoolowdingbangow
1/2 ton status
It's pretty knew?
I should have nown better haha
wetoolowdingbangow
1/2 ton status
Unfortunately probably not. Im kicking myself for not making it but I did what I could. Building a totally knew truck took more time then I imagined but I havent cut corners so thats good.
My current, probably more realistic goal is king of the hammers this year. That should be easy money.
wetoolowdingbangow
1/2 ton status
Did a little measuring on this today. My tank is roughly 11.5 inches tall at the biggest part. This should mean about 5 inches of it will end up in the bed I think.
31 gallon? Mine is 12.75" (figure 13.5" with the sender) or 14.5" including the inlet. But if yours in a 24 gallon that sounds about right.
wetoolowdingbangow
1/2 ton status
Haha
It did have the stock bench seat but it's whooped. Big chunks missing. I actually sold the blazer bench for 80 bucks but this one just became a dog couch.
wetoolowdingbangow
1/2 ton status
One of the center bars. I just cut the other one so there's 2 that will be in the halo.
I need to push the cage back to make sure they clear the roof lines, then i can fully weld them in.
A pillar up next. Glad to be done with this project. I have a feeling I need to add to the A. I already planned on running a bar just over the dash to tie the two legs together.
I may add two angle pieces in the upper corner of that or maybe a center bar down to said dash bar.
I need to push the cage back to make sure they clear the roof lines, then i can fully weld them in.
A pillar up next. Glad to be done with this project. I have a feeling I need to add to the A. I already planned on running a bar just over the dash to tie the two legs together.
I may add two angle pieces in the upper corner of that or maybe a center bar down to said dash bar.
