They often stock parts from multiple suppliers as the same P/N. It's possible to buy the same P/N twice in a row and get different parts. One of my rigs wound up with one caliper plated and the "matching" caliper bare.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
73 K20....crossmember time
- Thread starter wetoolowdingbangow
- Start date
They often stock parts from multiple suppliers as the same P/N. It's possible to buy the same P/N twice in a row and get different parts. One of my rigs wound up with one caliper plated and the "matching" caliper bare.
wetoolowdingbangow
1/2 ton status
I guess I was wondering how much you've been using them, with the truck in pieces and everything.
They were the same ones I used on the last truck a long long time ago...about 11 months to be exact.
ekajkrats
1/2 ton status
I used a taller water neck when I ran into this same issue. Gave me room to run a temp sensor.
The relays and power all stay as is, but your signal to relays comes from the FiTech harness instead of the other switch. Pretty damn simple and solves your other issue.
wetoolowdingbangow
1/2 ton status
Looked at the directions... it appears its really just the hot wire? I guess it uses the fitech sensor?
wetoolowdingbangow
1/2 ton status
I bought an autometer oil pressure gauge, a few ground straps, some exhaust bends and a few other odds and ends. I tried to buy a v belt from them and they said nope because California lol. Must be made out of asbestos.
Also pulled the trigger on a 22 circuit wiring harness. Ill get the efi on this weekend and start routing the exhaust. Just a few weeks from making noise I think...
Also pulled the trigger on a 22 circuit wiring harness. Ill get the efi on this weekend and start routing the exhaust. Just a few weeks from making noise I think...
yes it uses the FiTech coolant temp sensor and you can adjust when the fans kick on using the programmer. The ECU sends a ground to the fan relay, yellow is the #1 fan, black is the #2 fan.
Last edited:
Here is the detail
Thought there was some law about not being able to change your own wiper blades in CA - maybe part of that...?
wetoolowdingbangow
1/2 ton status
Probably. That or it doesn't have a sticker saying it's cancerous and going to kill you to death.
wetoolowdingbangow
1/2 ton status
Perfect. May as well. I got some fancy red anodized plugs for the manifold lol. Should make it faster.
wetoolowdingbangow
1/2 ton status
Surprisingly I got some stuff done. Hoping my o2 sensor reaches lol. I think I'll be ok.
Did those collectors come with your headers? Need some like that....
wetoolowdingbangow
1/2 ton status
Yeah they came with the hedmanns.
I am so copying you when I do my exhaust.
Progress looks good! For the first time in my life I used those same MSD wires you bought this very weekend. After using premade junk that was way too long it's great being able to cut them to fit.
wetoolowdingbangow
1/2 ton status
Hell yeah! I'll post up all the details of course.
Thanks! I totally agree...never the right length!
wetoolowdingbangow
1/2 ton status
Wiring harness showed up! This truck is going to be awesome when it's done. No more meth wiring!
