Luckily a 205 doesn't have a ton of hard to clean webbing like an aluminum case would so with a bit of solvent and wire wheel action it should clean up nicely
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
73 K20....crossmember time
- Thread starter wetoolowdingbangow
- Start date
wetoolowdingbangow
1/2 ton status
Yeah it's not bad so far. I just bought some etching juice but man do I need a sandblaster, a hot tank and a press.
https://ck5.com/forums/threads/4l80...05-ord-doubler-3-sticked-its-all-done.253000/
just incase you need good pics for reference of 205 assembly .
just incase you need good pics for reference of 205 assembly .
wetoolowdingbangow
1/2 ton status
https://ck5.com/forums/threads/4l80...05-ord-doubler-3-sticked-its-all-done.253000/
just incase you need good pics for reference of 205 assembly .
Ah most excellent. Thanks!
wetoolowdingbangow
1/2 ton status
You know it mang
wetoolowdingbangow
1/2 ton status
Beating the races out of this thing. Got new ones in already.
wetoolowdingbangow
1/2 ton status
I realized after I Rtv'd the black box on I should have painted the 205 first. Oh well I'm dumb. Guess I'll be making for hours on end. Better then cleaning rtv though.
The titan shaft is almost in. I can say with certainty that it's not a very well thought out design. With minor changes is could have been far easier and less beating and banging. I'm a little concerned about it shifting properly being that the shift collar is a press fit onto the titan shaft. I'm hoping it loosened up a bit with the shaft being driven through it.
The titan shaft is almost in. I can say with certainty that it's not a very well thought out design. With minor changes is could have been far easier and less beating and banging. I'm a little concerned about it shifting properly being that the shift collar is a press fit onto the titan shaft. I'm hoping it loosened up a bit with the shaft being driven through it.
1 part molasses and 9 parts water, let it soak for like a day. It’ll look like brand new after you wipe it off.
Also now I need to go read all 206 pages, see you guys in a couple hours
wetoolowdingbangow
1/2 ton status
****in snaprings without holes. Is there a magic answer to these without a blade screwdriver through both of my palms?
They make duck bill style snap ring pliers just for those. Makes It easy!
wetoolowdingbangow
1/2 ton status
Ah yes! I'll need to get some of those. Thanks!
wetoolowdingbangow
1/2 ton status
Well after having to take the titan shaft back out due to forgetting the c clip it's back in now. It's coming together. Next is the center assembly.
wetoolowdingbangow
1/2 ton status
Well things are going together...with some beatings. I thought maybe the rails were a bit off but it looks like this one is supposed to be that far out when forward. I'm going to try to get in a few hours on it in the morning...xmas always getting in the way.
I'm excited to have this thing together. It's been a long time coming.
I'm excited to have this thing together. It's been a long time coming.
Yeah, a lot easier w/ the right snap ring pliers. Went through that, once. Never again.
wetoolowdingbangow
1/2 ton status
Found one of these after 4 different stores. Orielly wins the cake. They work amazing for being so cheap. No more accidental stabbings.
wetoolowdingbangow
1/2 ton status
32 spline outputs to be built next. Well I just finished one so one to go.
I also realized the clip for the output bearing on the front is gone somehow. I have a 203 sitting in the garage that apparently is the same size so I'll steal that one I suppose. Looking forward to wrapping up this tcase build. Maybe tomorrow itll be ready for paint.
I also realized the clip for the output bearing on the front is gone somehow. I have a 203 sitting in the garage that apparently is the same size so I'll steal that one I suppose. Looking forward to wrapping up this tcase build. Maybe tomorrow itll be ready for paint.
Nice steady progress!
That red rag looked like a Santa hat at first glance. I thought you were gettin all Christmasy on us
Nice avatar
wetoolowdingbangow
1/2 ton status
Thanks man! Trying to get this ol girl going again.
Haha using Santa's hat as a grease rag. Thanks!
